Einträge 91 - 100 von 432

EMD 16cyl 645E3 Silenced(FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

V3-Second Version of the is Popular Prime mover!

The EMD 645 series engine was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models were introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 horsepower (2,200 kW), sixteen-cylinder form and in mehr…

GMD 16cyl 645E3B (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

V4-Fourth Version of this Popular Prime mover!
Recorded from a GMD SD40-2W

The EMD 645 series engine was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models were introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 horsepower (2,200 kW), mehr…

EMD 12cyl 645E V2 (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567D2 Turbo variation was used in the following...

Locomotives:
GP20

Although the mehr…

Goodwin/Alco 12cyl 244 (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Recorded from 4306 at the Rail Transport Museum at Thirlmere.
**Please Note**
Responding to user feedback this file uses "Standard North American Function Mapping".

This is a template used for all Diesel files from ESU LLC.
While we realize most Australian Locomotives do not use Bells they are included in the mapping due to the template used. This is easily changable so the user can set the function mehr…

GMD 12cyl 645C (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

As the EMD 567s got worn, Many Railroads underwent rebuild programs to prolong the life of their locomotives. One Program in particular was the Uceta GP-16 program on the SCL. Starting in 1979 they took many of their GP7s, GP9s, and GP18s and replaced the existing 567 prime movers with 16cyl 645C Power Assemblies. This combination resulted in a unique sound never before released in the Model Railroad mehr…

GE 16cyl 7FDL C39-8 (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Recorded from a C39-8 with shaft driven Westinghouse compressor.

Introduced in 1984, the C39-8 maintained the clean contours of the long hood and rounded cab roof of the Dash-7 series but featured larger, angular radiator “wings” at the rear of the carbody, an angular low short hood, and a boxy dynamic brake and clean air compartment at the front of the long hood, which jutted above the cab roofline. mehr…

Goodwin Alco 6cyl 251B (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

48/830 Class Goodwin Alco 6cyl 251B
Recorded by Jay Blanch of Notch 8 Precision Models

The 48 Class are a class of diesel locomotives built by AE Goodwin, Auburn for the New South Wales Government Railways between 1959 and 1970. Once the most ubiquitous locomotive in New South Wales, Australia, they are based on Alco frames and prime movers, using General Electric (later Associated Electrical Industries) electrical equipment. The South Australian mehr…

EMD 16cyl 645E3 V5 (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

V5-Fifth Version of this Popular Prime mover!
Recorded from a Silenced Exhaust Locomotive.

The EMD 645 series engine was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models were introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 mehr…

GE 16cyl FDL Early V3(FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Third version of this popular locomotive. This one recorded from a GE U30C

The GE FDL-16 prime mover was first used in 1959 in the General Electric U25B locomotive. Over the years little changed in terms of sound until the "Dash-8" series of GE locomotives was introduced. Known for their throaty chug and shaft driven compressor (rather than the more modern “Whoop” electric compressor) , the following GE mehr…

GMD 16cyl 645E3 Silenced(FT)  LokSound Nordamerikanische & Australische lokspezifische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Bowser GMD SD40-2F

The emd 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models was introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 horsepower (2,200 kW), sixteen-cylinder form and in 3,600 horsepower (2,700 kW), mehr…