Einträge 51 - 60 von 179

Baldwin 608A (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The Baldwin RF-16 was a 1,600-horsepower cab unit-type diesel locomotive built for freight service by the Baldwin Locomotive Works between 1950 and 1953. All RF-16s were configured with a B-B wheel arrangement and ran on two AAR Type B two-axle road trucks, with all axles powered. A total of 109 cab-equipped A units were built, along with 51 cabless booster B units, for a total of 160 locomotives built. mehr…

ALCO 12cyl 251C3 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in marine, generator and locomotive uses.

The 2000 Horsepower 12cyl 251C can be found in mehr…

GE 16cyl 7FDL Modern (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.

GE's AC series of mehr…

ALCO 12cyl 251C C420 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 12cyl 251C can be found in the following mehr…

GE 7FDL16AE (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.

Keeping in mehr…

ALCO 12cyl 251C C420 V2 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

This is version 2 of this popular sound file.

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive mehr…

MLW 12cyl 251B (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

Recorded from an MLW RS-18

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 1800 horsepower 12cyl version of the 251B could be found in the mehr…

ALCO 8cyl 251F (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 1500 horsepower 8cyl version of the 251F could be found in the following mehr…

MLW 12cyl 251C (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

Recorded from an MLW M420W

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 2000 horsepower 12cyl version of the 251C could be found in the mehr…

ALCO251-12  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

The Alco 251 diesel engine was developed by the American Locomotive Company to replace the 244 and 539. The 251 Prime mover was Alco’s best selling prime mover. In 1954, the 251 went into production with the inline-6 at Auburn, New York. The next year production of the V-12 followed. Samples of the 12Cyl versions were found in: RS-11, RSD-12, RS-18, RS-36, FPA-4, FPB-4, DL500B, RS-32, C420, MLW M420TR, M420W, DH643 and HR412
Ultimately a refined and successful design, the 251 outlived its mehr…