Einträge 71 - 80 von 432

EMD 16cyl 645E3 V5 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

V5-Fifth Version of this Popular Prime mover!
Recorded from a Silenced Exhaust Locomotive.

The EMD 645 series engine was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models were introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 mehr…

GE 16cyl FDL Early V3(FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Third version of this popular locomotive. This one recorded from a GE U30C

The GE FDL-16 prime mover was first used in 1959 in the General Electric U25B locomotive. Over the years little changed in terms of sound until the "Dash-8" series of GE locomotives was introduced. Known for their throaty chug and shaft driven compressor (rather than the more modern “Whoop” electric compressor) , the following GE mehr…

EMD 16cyl 567C V3 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

Our 3rd varient of this very common prime mover.

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567C variation could be found in mehr…

EMD 8cyl 567CR (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

The EMD 567 family of Prime Mover was one of the most widely used in the world! From F-Units to Geeps this popular power house can still be found in many locomotives riding the rails today. Our EMD 12cyl version of the 567B would be appropriate for the following locomotives:

SW7
SW9
NW2
NW3
NW5
RS1325

Although the following locomotives used a slightly different variation of the EMD 12cyl 567, our sound mehr…

EMD 16cyl 645E3 (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The emd 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models was introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 horsepower (2,200 kW), sixteen-cylinder form and in 3,600 horsepower (2,700 kW), twenty-cylinder form. EMD mehr…

EMD 12cyl 645E3 (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The EMD GP39-2 is a 4-axle diesel locomotive built by General Motors Electro-Motive Division between 1974 and 1984. 239 examples of this locomotive were built for American railroads. Part of the EMD Dash 2 line, the GP39-2 was an upgraded GP39. The power for this locomotive was provided by a turbocharged 12-cylinder EMD 645E3 diesel engine, which could produce 2,300 horsepower.

While this sound was mehr…

GE 16cyl 7FDL Modern (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.

GE's AC series of mehr…

ALCO 12cyl 251B (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 1800 horsepower 12cyl version of the 251B mehr…

EMD 12cyl 645E (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The EMD 645 family of diesel engines were designed and manufactured by the Electro-Motive Division of General Motors. The 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. The 645 series engines entered production in 1965. All 645 engines utilize forced induction, with either a Roots blower or a turbocharger. The 645 series has a maximum engine speed of mehr…

EMD 16cyl 645F3B (FT)  LokSound V4.0 Amerikanische und Australische Geräusche H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

Recorded from an SD50

The SD50 was produced in response to increasingly tough competition from GE Transportation Systems, whose Dash 7 line was proving quite successful with railroads. While EMD's SD40-2 was a reliable and trusted product, GE's line included locomotives up to 3,600 hp (2,685 kW) with more modern technology, as well as very competitive finance and maintenance deals. EMD responded throughout the SD50 program by offering discounts on mehr…