Einträge 81 - 90 von 271

SD40-2  LokSound 5 Lokspezifische Geräusche N XL L M4

Between 1972 and 1984 Electro-Motive Divison of General Motors manufactured 3950 samples of diesel-electric SD 40-2 for allmost each american Class 1 railroad. A 16 cylinder two-stroke diesel motor developed 3000 hp and enable the six axle road freight units to reach a maximum speed of 105 km/h.
This file is setup for ESU SD40-2, "Santa Fee" and "Union Pacific" version. mehr…

SD40-2  LokSound 5 Lokspezifische Geräusche N XL L M4

Between 1972 and 1984 Electro-Motive Divison of General Motors manufactured 3950 samples of diesel-electric SD 40-2 for allmost each american Class 1 railroad. A 16 cylinder two-stroke diesel motor developed 3000 hp and enable the six axle road freight units to reach a maximum speed of 105 km/h.
This file is setup for ESU SD40-2, "BNSF and "Norfolk Southern" version. mehr…

SD40-2 CR  LokSound 5 Lokspezifische Geräusche N XL L M4

Between 1972 and 1984 Electro-Motive Divison of General Motors manufactured 3950 samples of diesel-electric SD 40-2 for allmost each american Class 1 railroad. A 16 cylinder two-stroke diesel motor developed 3000 hp and enable the six axle road freight units to reach a maximum speed of 105 km/h.
This file is setup for ESU SD40-2, "CONRAIL" version. mehr…

Baldwin VO-6  LokSound Select Retail Soundfiles H0 N XL L M4

Baldwin VO-6 Prime Movers were used in in only one locomotive.
Baldwin's 142 VO-660s.

Though not quite correct the VO-6 Prime mover is very similar to the sound of the V0-8 Prime mover.
This would be correct for the very popular VO-1000

As with all Select decoders there are also 16 separate horns, 2 separate brake squeals, and 2 bells include on this one sound profile! All changeable using CV48

EMD 16cyl 567C (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567C variation was used in the following...

Locomotives:
E9 (dual prime mehr…

Baldwin 606NA  LokSound Select Retail Soundfiles H0 N XL L M4

Baldwin 606 and 606NA Prime Movers were used in the following prototype locomotives:
S-8, DRS-4-4-660, DRS-4-4-750, DRS-6-4-660.

As with all Select decoders there are also 16 separate horns, 2 separate brake squeals, and 2 bells include on this one sound profile! All changeable using CV48

GE 8cyl 7FDL (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The GE U18B was introduced by GE as a branch line roadswitcher in 1973. Easy to spot due to its relatively short length — 54 ft 8 in (16.66 m) — it was the only North American locomotive powered by the 8-cylinder FDL engine.

There were some export locomotives built with this prime mover:
SG10B, U15C, U17C, U20C, and the C18-7i

The U18B was not well recieved as only 5 railroads bought the locomotive, mehr…

EMD 16cyl 567D3 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567D3 variation was used in the following...

Locomotives:
GP30
SD24

Although mehr…

ALCO 6cyl 539 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

The ALCO 539 engine was developed in response to the perceived drawback that ALCO's line of diesel switchers had a restricted field of vision because of the high hood. Both Baldwin and EMC were offering diesel switchers with a lower engine hood that the trainmen could see over.

The ALCO S-1 and S-3 were 660 horsepower (490 kW) switcher diesel-electric locomotives produced by ALCO and their Canadian subsidiary Montreal Locomotive Works (MLW). mehr…

EMD 16cyl 567BC (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567C variation was used in the following...

Locomotives:
E9 (dual prime mehr…