Based on approved USRA light Mikado design French State Railway SNCF ordered 1323 samples of 2-8-2 steam loco 141 R. The dependable 2 cylinder locos reached a maximum speed of 100 km/h and were used in freight and passenger service until 1974.==> (oil burner instead coal shoveling sound selectable via CV48 = value 1) <==
Prussian T16.1 had been one of the most important steam locomotives for short freight and heavy switching duty. The two cylinder loco delivered 1070 HP and reached a maximum speed of 60 km/h. Some locos received a Riggenbach-brake for the use on very steep grades.
Two cylinder steam locomotive BR 52 had been developed out of the BR 50 during WWII. With the maximum axle weight of only 15.4 tons and a maximum speed of 80 km/h the 52 had been used for freight and passenger service. After WWII few locos had remained at DB. At DR (GDR State Railway) and many other European state railways the locos stayed in service often till the 1980s.
For fast passenger service German Deutsche Reichsbahn-Gesellschaft DRG ordered 60 samples of three-cylinder steam loco 03.10. The locos developed 1790 HP and reached a maximum speed of 140 km/h. DRG-successors DB and DR equipped some locos with new boilers. The locos without this re-design feature were scrapped till 1957. During the same year DB equipped 25 samples with new boilers. The so-called Neubaukessel-03.10 developed 1870 HP and reached a maximum speed of 140 km/h. In 1966 the last more…
In 1912 Prussian State Railway ordered the first of 462 samples of the 4-6-4 saddle tank loco T18. The two-cylinder loco developed 1140 HP and reached a maximum speed of 100 km/h. The locos were used for passenger trains on main and branch lines and stayed in service until 1974.
In the 1950s Deutsche Reichsbahn DR of GDR needed a high-speed locomotive to test new passenger cars. The testing department of DR developed the 18 201 out of tank loco 61 002, a new boiler (out of “Reko” re-design programme) and the cylinders of a test loco. The loco develops 1590 HP and reaches a maximum speed of 176 km/h. 18 201 is the fastest operable steam locomotive in the world.
In 1939 German Deutsche Reichsbahn-Gesellschaft DRG received 1st of more than 3100 samples of 2-10-0 two-cylinder steam loco BR 50. The loco developed 1625 HP and reached a maximum speed of 80 km/h. With its axle load of just 15,2 tons the locos were used even on branch lines with light weight rails. Locos of DB quitted service in 1977, the DR locos were used for ten more years.
Electric loco 111 of Deutsche Bundesbahn DB was purchased for fast passenger service on main lines. The four traction motors develop 3620 kW and enable the loco to reach 160 km/h. For consist use with heavy Intercity trains some locos received new pantographs. Some years ago all of the locos were given to DB Regio for push-pull operation.
The Kö history started in 1933. After short time the manufacturers agreed a standardization of design. The diesel mechanical locos developed around 30 – 39 HP and reached around 23 km/h. Both German State Railways used few Kö locos till the 1970s. Nowadays many locos are used at Railway Museums.
The classes (BR) 215 and 218 diesel locomotives of the Western German Railway (DB) are used in mixed service since 1968. 218 101 to 194, 218 242 to 288 were equipped with a 12 cylinder 4 stroke main Diesel from MAN that was later called MTU 12 V 956 TB10 that generates 2500 HP. The 2800 HP version of this motor is called MTU 12 V 956 TB11. In the late 1980s the exhaust system of BR 218 with the 12 V motor had been optimized. Since 1995 many of the 218 are equipped with motors called "MTU 12 V more…