Einträge 31 - 40 von 99

EMD 16cyl 710G3B (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The EMD 710 is a line of diesel engines built by Electro-Motive Diesel (EMD). Introduced in 1985, the 710 series replaced the earlier EMD 645 series. Since its introduction, EMD has continually upgraded the 710G diesel engine. Power output has increased from 3,800 horsepower on 1985's 16-710G3A to 4,500 horsepower on 2012's 16-710G3C-T2. Over the production span of certain locomotive models, upgraded mehr…

UP 4-8-4 FEF (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE STEAM" features!
MUST use LokProgrammer Version 4.5.1 or newer.

Recorded from UP FEF 4-8-4 Northern #844
Built in 1944 Steam Locomotive No. 844 is the last steam locomotive built for Union Pacific Railroad. Made for passenger service it also hauled some freight in the late 1950s. Still serving today it has become Union Pacific's "Living Legend" as it holds the world record for longest contiuosly running steam locomotive!

With 80 inch Drivers, 300lbs of boiler mehr…

UP Challenger 4-6-6-4 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE STEAM" features!
MUST use LokProgrammer Version 4.5.1 or newer.

The name Challenger was given to steam locomotives with a 4-6-6-4 wheel arrangement. This means that they have four wheels in the leading "pilot" truck, which helps guide the locomotive into curves; two sets of six "driving" wheels, and finally, four "trailing" wheels, which support the rear of the engine and its massive firebox. Each set of driving wheels has its own steam cylinder. In essence, mehr…

EMD/ASEA AEM-7/ALP-44(FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
AEM-7/ALP-44

The AEM-7 is a twin-cab four-axle 7,000 hp (5.2 MW) B-B electric locomotive built by Electro-Motive Division (EMD) and ASEA between 1978–1988. The locomotive was a derivative of the Swedish SJ Rc4 designed for passenger service in the United States. The primary customer was Amtrak, which bought 54 for use on the Northeast Corridor and Keystone Corridor. Two commuter operators, MARC and mehr…

MLW 16cyl 251E (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer. ALCO closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in marine, generator and locomotive uses.

Our recording is from a 16cyl - 251E and could be mehr…

GE ET44C4 Tier 4 GEVO (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Introduced in 2012, General Electric's Tier 4 GEVo Series represents the latest in diesel-electric locomotive technology. The GE Tier 4 GEVo is designed to meet increasingly stringent Environmental Protection Agency (EPA) emissions regulations.

The EPA “Tier” emissions standards are a series, or Tiers, of allowable emissions levels based upon a locomotives’ date of manufacture. The highest and most mehr…

GE 16cyl 7FDL Early V2(FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

This was recorded from a Later U Series 16 cyl GE.

First introduced in the late 50's, the GE FDL is one of the most popular locomotive prime movers ever produced. Aside from a very few HDL prime movers installed in the AC6000CW's, FDL prime movers were still being put in every new GE locomotive until 2003 when the first Evolution Series was implemented.

As with all SELECT decoders there are up to 16 mehr…

EMD 12cyl 645E V2 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567D2 Turbo variation was used in the following...

Locomotives:
GP20

Although the mehr…

GE 7FDL16AE (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.

Keeping in mehr…

CAT Powered 3608 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

For Bowser M636 CP 4711/MNNR 71 CAT Powered M636

CP 4711 was rebuilt in 1988 with a Caterpillar 3608 prime mover. In 1998 this loco was sold to Minnesota Commercial where is still resides today wearing Road number 71.

As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.

Prime Mover:
CV48=0 mehr…