")}("width","220px",["/lib/bootstrap-select/css/bootstrap-select.min.css"],"rel=\u0022stylesheet\u0022 ");
Equipped with ESU "FULL THROTTLE" features!
48/830 Class Goodwin Alco 6cyl 251B
Recorded by Jay Blanch of Notch 8 Precision Models
The 48 Class are a class of diesel locomotives built by AE Goodwin, Auburn for the New South Wales Government Railways between 1959 and 1970. Once the most ubiquitous locomotive in New South Wales, Australia, they are based on Alco frames and prime movers, using General Electric (later Associated Electrical Industries) electrical equipment. The South Australian Railways 830 and Silverton Rail 48s classes are of a very similar design.
The roughly 1000 horsepower 6cyl version of the 251B could be found in the following locomotives:
NSW 48 Class
SA 830 Class
And in some North American locos:
S-6
T-6
Other 6cyl 251 Variants sound almost identical and can be found in the following prototypes.
S-5
DL535E
DL535EW
MLW S-13
MLW RS-23
This file has a unique feature on F14(front) and F15(rear) that allows the user to cycle through the Numberboard and marker lights to find the pattern that suits them most in almost any running condition.
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 Goodwin Alco 6cyl 251B
Uses our INTERMEDIATE-HORNS-AND-BELLS template...
Horns:
CV48=0 Australian Nathan P5
CV48=1 RVB Hurricane 3 Chime
CV48=2 RVB Hurricane 5 Chime
CV48=3 Twin RVB Hurricane 5 Chime
CV48=4 Nathan Old Cast P5
CV48=5 Westinghouse Single A-B
CV48=6 Leslie S3L #1
CV48=7 Leslie RS5T
CV48=8 Leslie A125
CV48=9 Nathan M3
CV48=10 Leslie RS3K
CV48=11 Nathan K5H
CV48=12 Leslie S2M
CV48=13 Nathan M3H
CV48=14 Wabco AABB #1
CV48=15 Wabco AABB #2
Bells:
CV48=0 Steel Bell
CV48=64 ALCO Bronze Bell
Add values from above for total CV48 value.
Default CV48 Value = 69
0 - Goodwin Alco 6cyl 251B
5 - Westinghouse Single A-B
64 - ALCO Bronze Bell
Total 0+5+64 = 69
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
Recorded from 4306 at the Rail Transport Museum at Thirlmere.
**Please Note**
Responding to user feedback this file uses "Standard North American Function Mapping".
This is a template used for all Diesel files from ESU LLC.
While we realize most Australian Locomotives do not use Bells they are included in the mapping due to the template used. This is easily changable so the user can set the function mapping work as desired.
In October 1956 the NSWGR took delivery of 4301, the first unit of an order for six locomotives to be built by A Goninan and Co at their Broadmeadow plant in suburban Newcastle. In June 1957 the last of the class, 4306, entered service. They were fitted with an Alco 244 engine and were rated at 1600hp (1193kW) for traction.
While recorded from a 43 Class this 12cyl 244 prime mover sound file would also work in the following locomotives.
RS-2
RSC-2
RS-3
RSC-3
RS-10
RSC-2
RSC-3
RSD-4
RSD-5
MRS-1
RSC-24
FCA-3
DL-500
And others!
Although there are slight differences, this sound file could also be used in the following locomotives:
FA-1
FB-1
FA-2
FB-2
FPA-2
FPB-2
As there are no 16cyl 244 equipped locos remaining, the 12cyl 244 would be a close stand in for the following Locomotives:
PA-1
PB-1
PA-2
PB-2
RSD-7
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 Goodwin/Alco 12cyl 244
Uses our INTERMEDIATE-HORNS-AND-BELLS template...
Horns:
CV48=0 Leslie A200
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Leslie S3L #1
CV48=7 Leslie RS5T
CV48=8 Leslie A125
CV48=9 Nathan M3
CV48=10 Leslie RS3LR
CV48=11 Australian K-5UL-AU-LS
CV48=12 Leslie RS5T #2
CV48=13 Nathan M3H
CV48=14 Wabco E2
CV48=15 Wabco AABB
Bells:
CV48=0 Steel Bell
CV48=64 ALCO Bronze Bell
Add values from above for total CV48 value.
Default CV48 Value = 68
0 - Goodwin/Alco 12cyl 244
4 - Nathan Old Cast P5
64 - ALCO Bronze Bell
Total 0+4+64 = 68
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Mit dem Herunterladen der gewünschten Datei stimmen sie ausdrücklich den oben genannten Lizenzbedingungen zu.