Showing items 51 - 60 of 110

ALCO244 16cyl H0

The Alco 244 prime movers were widely used and still can be found on shortlines and tourist railroads today. Primary uses for the Alco 16 Cyl 244’s were only used in Alco Pa-1’s, PA-2’s and RSD-7s. It was not considered to be a very reliable prime mover. There are no known existing examples of Locomotives with 16 Cyl 244 prime movers.
This file contains 16 Airhorns accessible by changing CV48 values 0-15

ALCO251 (16 cyl) H0

The Alco 251 diesel engine was developed by the American Locomotive Company to replace the 244 and 539. The 251 Prime mover was Alco’s best selling prime mover. In 1954, the 251 went into production with the inline-6 at Auburn, New York. Ultimately a refined and successful design, the 251 outlived its designer. For a time it was built in Canada by Montreal Locomotive Works. Today it is still available from Fairbanks-Morse. Examples of the 16-Cyl 251 can be found in the following more…

ALCO251 Air Start H0

The Alco 251 diesel engine was developed by the American Locomotive Company to replace the 244 and 539. The 251 Prime mover was Alco’s best selling prime mover. In 1954, the 251 went into production with the inline-6 at Auburn, New York. Ultimately a refined and successful design, the 251 outlived its designer. For a time it was built in Canada by Montreal Locomotive Works. Today it is still available from Fairbanks-Morse. Examples of the 16-Cyl 251 can be found in the following more…

ALCO251-12 H0

The Alco 251 diesel engine was developed by the American Locomotive Company to replace the 244 and 539. The 251 Prime mover was Alco’s best selling prime mover. In 1954, the 251 went into production with the inline-6 at Auburn, New York. The next year production of the V-12 followed. Samples of the 12Cyl versions were found in: RS-11, RSD-12, RS-18, RS-36, FPA-4, FPB-4, DL500B, RS-32, C420, MLW M420TR, M420W, DH643 and HR412
Ultimately a refined and successful design, the 251 outlived its more…

Baldwin 606_606NA H0

Baldwin 606 and 606NA Prime Movers were used in the following prototype locomotives:
S-8, DRS-4-4-660, DRS-4-4-750, DRS-6-4-660.
This file contains 16 Airhorns accessible by changing CV48 values 0-15

Baldwin 606SC_606A H0

Baldwin 606SC and 606A Prime Movers were used in quite a few Baldwin prototypes.
DS-4-4-1000, RS-12, S-12, DRS-6-4-1000, DRS-4-4-1000, DR-6-2-1000, DT-6-6-2000, RT-624, DR-6-4-2000, DR-6-2-1000.

Though not quite correct the 606SC/606A Prime Mover sounds very similar to the 608SC/608A Prime movers This would be appropriate for:
DRS-6-4-1500, DRS-4-4-1500, DRS-6-6-1500, AS-416, AS-16, AS-616, DR-6-4-1500, DR-4-4-1500 and the RF-16(Sharknose).
This file contains 16 Airhorns accessible by changing more…

Baldwin 608A (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The Baldwin RF-16 was a 1,600-horsepower cab unit-type diesel locomotive built for freight service by the Baldwin Locomotive Works between 1950 and 1953. All RF-16s were configured with a B-B wheel arrangement and ran on two AAR Type B two-axle road trucks, with all axles powered. A total of 109 cab-equipped A units were built, along with 51 cabless booster B units, for a total of 160 locomotives built. more…

Baldwin VO-6 H0

Baldwin VO-6 Prime Movers were used in in only one locomotive.
Baldwin's 142 VO-660s.

Though not quite correct the VO-6 Prime mover is very similar to the sound of the V0-8 Prime mover.
This would be correct for the very popular VO-1000
This file contains 16 Airhorns accessible by changing CV48 values 0-15

CAT Powered 3608 (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

CP 4711 was rebuilt in 1988 with a Caterpillar 3608 prime mover. In 1998 this loco was sold to Minnesota Commercial where is still resides today wearing Road number 71.

As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.

Prime Mover:
CV48=0 M636CAT 3608

Uses our INTERMEDIATE-HORNS-AND-BELLS more…

D&RGW K-27 463 (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE STEAM" features!
MUST use LokProgrammer Version 4.5.1 or newer.

D&RGW (Cumbres and Toltec) K27 463

The ESU Full Throttle Steam files now include a few new logic features for added operational realism while still leaving you in control of HOW you wish to run your locomotive.
Heavy Load: F9 by default.
Similar to the “Drive Hold” button on the Full Throttle Diesel files “Heavy Load” allows you to adjust the “Steam Cut Off Valve” at any speed allowing for a more…