Showing items 51 - 60 of 96

ALCO251 Air Start H0

The Alco 251 diesel engine was developed by the American Locomotive Company to replace the 244 and 539. The 251 Prime mover was Alco’s best selling prime mover. In 1954, the 251 went into production with the inline-6 at Auburn, New York. Ultimately a refined and successful design, the 251 outlived its designer. For a time it was built in Canada by Montreal Locomotive Works. Today it is still available from Fairbanks-Morse. Examples of the 16-Cyl 251 can be found in the following more…

ALCO251-12 H0

The Alco 251 diesel engine was developed by the American Locomotive Company to replace the 244 and 539. The 251 Prime mover was Alco’s best selling prime mover. In 1954, the 251 went into production with the inline-6 at Auburn, New York. The next year production of the V-12 followed. Samples of the 12Cyl versions were found in: RS-11, RSD-12, RS-18, RS-36, FPA-4, FPB-4, DL500B, RS-32, C420, MLW M420TR, M420W, DH643 and HR412
Ultimately a refined and successful design, the 251 outlived its more…

Baldwin 606_606NA H0

Baldwin 606 and 606NA Prime Movers were used in the following prototype locomotives:
S-8, DRS-4-4-660, DRS-4-4-750, DRS-6-4-660.
This file contains 16 Airhorns accessible by changing CV48 values 0-15

Baldwin 606SC_606A H0

Baldwin 606SC and 606A Prime Movers were used in quite a few Baldwin prototypes.
DS-4-4-1000, RS-12, S-12, DRS-6-4-1000, DRS-4-4-1000, DR-6-2-1000, DT-6-6-2000, RT-624, DR-6-4-2000, DR-6-2-1000.

Though not quite correct the 606SC/606A Prime Mover sounds very similar to the 608SC/608A Prime movers This would be appropriate for:
DRS-6-4-1500, DRS-4-4-1500, DRS-6-6-1500, AS-416, AS-16, AS-616, DR-6-4-1500, DR-4-4-1500 and the RF-16(Sharknose).
This file contains 16 Airhorns accessible by changing more…

Baldwin 608A (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The Baldwin RF-16 was a 1,600-horsepower cab unit-type diesel locomotive built for freight service by the Baldwin Locomotive Works between 1950 and 1953. All RF-16s were configured with a B-B wheel arrangement and ran on two AAR Type B two-axle road trucks, with all axles powered. A total of 109 cab-equipped A units were built, along with 51 cabless booster B units, for a total of 160 locomotives built. more…

Baldwin VO-6 H0

Baldwin VO-6 Prime Movers were used in in only one locomotive.
Baldwin's 142 VO-660s.

Though not quite correct the VO-6 Prime mover is very similar to the sound of the V0-8 Prime mover.
This would be correct for the very popular VO-1000
This file contains 16 Airhorns accessible by changing CV48 values 0-15

CAT Powered 3608 (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

CP 4711 was rebuilt in 1988 with a Caterpillar 3608 prime mover. In 1998 this loco was sold to Minnesota Commercial where is still resides today wearing Road number 71.

As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.

Prime Mover:
CV48=0 M636CAT 3608

Uses our INTERMEDIATE-HORNS-AND-BELLS more…

Dual EMD 12c 567 E-Unit (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

Recorded from an original 567 Dual Prime E-Unit

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services.

E-units standardized the two engine configuration more…

EMD 12cyl 567A (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!

Recorded from an EMD NW5

The EMD 567 family of Prime Mover was one of the most widely used in the world! From F-Units to Geeps this popular power house can still be found in many locomotives riding the rails today. Our EMD 12cyl version of the 567A would be appropriate for the following locomotives:

NW2
NW3
NW5
TR2
TR3
TR4
SW7

And others.....

While the recording is from a 567A many 12cyl 567B and 567C equipped locos sounded very more…

EMD 12cyl 567B (FT) H0 N XL L

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

The EMD 567 family of Prime Mover was one of the most widely used in the world! From F-Units to Geeps this popular power house can still be found in many locomotives riding the rails today. Our EMD 12cyl version of the 567B would be appropriate for the following locomotives:

SW7
SW9
NW2
NW3
NW5
RS1325

Although the following locomotives used a slightly different variation of the EMD 12cyl 567, our sound more…