Showing items 1 - 10 of 13

T18 DRG Ep. II N XL L M4

The Prussian Railway Administration KPEV had a total of 462 examples of the 1140 hp 2'C2' T18 tank locomotives built between 1912 and 1923. The manufacturer Vulcan delivered twenty machines to Württemberg in 1919. The original task was to transport fast passenger trains on short connections. The two-cylinder locomotives could be used forwards and backwards at 100 km/h and thus did not have to be turned at the end point. In a Prussian way, the locomotives designated as class 78.0-5 from the more…

T18 KPEV Ep. I N XL L M4

The Prussian Railway Administration KPEV had a total of 462 examples of the 1140 hp 2'C2' T18 tank locomotives built between 1912 and 1923. The manufacturer Vulcan delivered twenty machines to Württemberg in 1919. The original task was to transport fast passenger trains on short connections. The two-cylinder locomotives could be used forwards and backwards at 100 km/h and thus did not have to be turned at the end point. In a Prussian way, the locomotives designated as class 78.0-5 from the more…

T18 DB Ep. IV N XL L M4

The Prussian Railway Administration KPEV had a total of 462 examples of the 1140 hp 2'C2' T18 tank locomotives built between 1912 and 1923. The manufacturer Vulcan delivered twenty machines to Württemberg in 1919. The original task was to transport fast passenger trains on short connections. The two-cylinder locomotives could be used forwards and backwards at 100 km/h and thus did not have to be turned at the end point. In a Prussian way, the locomotives designated as class 78.0-5 from the more…

T18 DB Ep. III N XL L M4

The Prussian Railway Administration KPEV had a total of 462 examples of the 1140 hp 2'C2' T18 tank locomotives built between 1912 and 1923. The manufacturer Vulcan delivered twenty machines to Württemberg in 1919. The original task was to transport fast passenger trains on short connections. The two-cylinder locomotives could be used forwards and backwards at 100 km/h and thus did not have to be turned at the end point. In a Prussian way, the locomotives designated as class 78.0-5 from the more…

SNCF 140 C N XL L M4

Between 1913 and 1917 the French state railway company ÉTAT purchased 340 copies of the 1’D 140 C steam locomotive. After the beginning of the First World War, production was outsourced to British manufacturers. A third series of 70 machines was ordered for the transport of French artillery trains and after the War sold in equal parts to the French Eastern Railway EST and the PLM. The locomotives intended for freight train service developed 1210 hp and achieved an impressive 70 km/h for a more…

BR 78 N XL L M4

In 1912 Prussian State Railway ordered the first of 462 samples of the 4-6-4 saddle tank loco T18. The two-cylinder loco developed 1140 HP and reached a maximum speed of 100 km/h. The locos were used for passenger trains on main and branch lines and stayed in service until 1974.

BR 83.10 N XL L M4


The new locomotive program of the Deutsche Reichsbahn DR after WW II contained a four-coupled tank locomotive with a drive wheel diameter of 1250 mm and a top speed of 60 km/h. The locomotive, which was designed for operation on branch lines, had an axle load of only 15 t. In accordance with their intended use, all locomotives had a bell next to the chimney. The last of the 27 units built from 1955 onwards was retired in 1974.
This project file is created for use in the PIKO H0-Model. For the more…

ELNA N XL L M4

To standardize steam locomotives, the Engere Locomotive Standards Committee (ELNA) was founded in 1917. In addition to the framework conditions for the Einheitslokomotiven of the Deutsche Reichsbahn-Gesellschaft DRG, the ELNA also laid down principles for steam locomotives of non-state-owned railways. Three types were developed, of which the 1’C and D versions were by far the most common. Many parts could be exchanged for one another. Since frames, water boxes and driver's cabs were not more…

RhB G 2/2 - G2/3 N XL L M4

In 1896 Swiss Rhaetian Railways RhB ordered two samples of Mallet type G2/2 + 2/3. The locos developed 510 HP and reached a maximum speed of 35 km/h. In 1926 RhB sold both locos to a Swiss power plant company.

BR 78 / pr. T18 N XL L M4

In 1912 Prussian State Railway ordered the first of 462 samples of the 4-6-4 saddle tank loco T18. The two-cylinder loco developed 1140 HP and reached a maximum speed of 100 km/h. The locos were used for passenger trains on main and branch lines and stayed in service until 1974.

Sound project setup suitable for PIKO Locomotives from 2020. Function Mapping, Speed- and Motorsettings are adjusted. Please download to a LokSound 5 Decoder with PluX22 interface.