")}("width","220px",["/lib/bootstrap-select/css/bootstrap-select.min.css"],"rel=\u0022stylesheet\u0022 ");
The GE "Genesis" series of Locomotives was developed to be the main locomotives for Amtrak. Amtraks EMD F40PH locomotives were aging fast and GE came to the rescue with a more powerful and more fuel efficient design. Some P42 Locomotives were built with a Dual Mode capability utilizing a 3rd Rail shoe for collecting electricity. These engines run on the North East Corridor on Amtrak and on Metro North. The ESU version is the DC model which is much more common. It can be used to represent the P42s used by Amtrak, Via, NJT and Conn DOT. It can also be used in the non-electrified Areas of Metro North.
The P42 has a Very Specific Sound set. No Generic GE sound is correct for it. We have gone out of our way to make sure the sound we provide is as accurate as possible. We’ve even had the opportunity to take a cab in a P42 and take note of exactly how the engine was operated so that we could produce a sound that is absolutely true to the prototype.
Some the P42 Specific Features include the following:
-Air Bell and E-Bell (E-Bell Default)
-Automatic E-Bell and Flashing Ditch Lights with the Horn
-Awesome LOUD K5LA Amtrak P42 Horn
-Low Idle sounds (when HEP is off)
-P42 Dynamic Brake sounds
-Accurate HEP Sounds with the Prime Mover running about 900 RPM
-Change in sound when HEP is active an heavy load is applied
-Stand By Mode when HEP is active and sitting still (on a function button)
-Auto Crossing Sequence loop with Bell and Flashing Ditch Lights (Real P42's have a button on the floor to activate this!)
-Air Dryer sound
-Outstanding "Whoop" Air compressor sounds
-Function outputs AUX 1 and AUX 2 set up for Reversing Red Lights on nose and tail with ability to be turned off separate from the Headlights for prototypical running.
-Function outputs AUX 3 and AUX 4 are set up for Flashing Ditch Lights Beschreibung ausblenden mehr…
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.
GE's AC series of locomotives were introducted in 1994. They share the same carbody design and many of the internal components as the Dash-9 series, except they are equipped with AC traction motors instead of the conventional DC versions. The cab air conditioner was moved from the left (conductor's) side walkway to a position under the cab floor to make space for the six traction inverters (one per axle) that supply the AC current to the traction motors.
The "Modern" GE 7FDL 16Cyl Prime mover can be found in the following Locos:
Dash 8-39B
Dash 8 40-B
Dash 8-40BW
Dash 8-39C
Dash 8-40C
Dash 8-40CM
Dash 8-40CW
Dash 8-41CW
Dash 8-44CW
Dash 9-40C
Dash 9-40CW
Dash 9-44CW
C38EMi
C38AChe
AC4400CW
Some AC6000CW were built with 7FDL-16cyls and were later converted to 7HDL-16cyl. Some were never converted. Please refer to the prototype for reference.
Passenger Locos including: P40DC, and P42DC were built slightly different and contained HEP. For these engines plese use Select Sound file (73482) or V4.0 Sound file (74482).
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 GE 16cyl 7FDL Modern
Uses our NEW-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Nathan K3HA (Duplicate horn due to space restrictions)
CV48=7 Leslie S3L #1
CV48=8 Leslie S5T
CV48=9 Nathan K5H
CV48=10 Nathan K5H (Duplicate horn due to space restrictions)
CV48=11 Nathan K5H (Duplicate horn due to space restrictions)
CV48=12 Nathan K5H (Duplicate horn due to space restrictions)
CV48=13 Nathan K5H (Duplicate horn due to space restrictions)
CV48=14 Nathan K5H (Duplicate horn due to space restrictions)
CV48=15 Nathan K5H (Duplicate horn due to space restrictions)
Bells:
CV48=0 GE Fast Steel Bell
CV48=64 Modern E-Bell
Add values from above for total CV48 value.
Default CV48 Value = 0
0 - GE 16cyl 7FDL Modern
5 - Nathan K3HA
0 - GE Fast Steel Bell
Total 0+5+0 = 5
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.
GE's AC series of locomotives were introducted in 1994. They share the same carbody design and many of the internal components as the Dash-9 series, except they are equipped with AC traction motors instead of the conventional DC versions. The cab air conditioner was moved from the left (conductor's) side walkway to a position under the cab floor to make space for the six traction inverters (one per axle) that supply the AC current to the traction motors.
The "Modern" GE 7FDL 16Cyl Prime mover can be found in the following Locos:
Dash 8-39BE / B39-8E
Dash 8-39B / B39-8 - roughly same Prime mover but different exhaust and Compressor
Dash 8 40-B / B40-8
Dash 8-40BW / B40-8W
Dash 8-39C / C39-8 - roughly same Prime mover but different exhaust and Compressor
Dash 8-40C / C40-8
Dash 8-40CM / C40-8M
Dash 8-40CW / C40-8W
Dash 8-41CW / C41-8W
Dash 8-44CW / C44-8W
Dash 9-40C / C40-9
Dash 9-40CW / C40-9W
Dash 9-44CW / C40-9W
C38EMi
C38AChe
AC4400CW / AC4400
Some AC6000CW were built with 7FDL-16cyls and were later converted to 7HDL-16cyl. Some were never converted. Please refer to the prototype for reference.
Passenger Locos including: P40DC, and P42DC were built slightly different and contained HEP. For these engines plese use Select Sound file (73482) or V4.0 Sound file (74482).
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 GE 16cyl 7FDL Modern
Uses our NEW-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Nathan K3HA (Duplicate horn due to space restrictions)
CV48=7 Leslie S3L #1
CV48=8 Leslie S5T
CV48=9 Nathan K5H
CV48=10 Nathan K5H (Duplicate horn due to space restrictions)
CV48=11 Nathan K5H (Duplicate horn due to space restrictions)
CV48=12 Nathan K5H (Duplicate horn due to space restrictions)
CV48=13 Nathan K5H (Duplicate horn due to space restrictions)
CV48=14 Nathan K5H (Duplicate horn due to space restrictions)
CV48=15 Nathan K5H (Duplicate horn due to space restrictions)
Bells:
CV48=0 GE Fast Steel Bell
CV48=64 Modern E-Bell
Add values from above for total CV48 value.
Default CV48 Value = 0
0 - GE 16cyl 7FDL Modern
5 - Nathan K3HA
0 - GE Fast Steel Bell
Total 0+5+0 = 5
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.
Keeping in tradition with GE's locomotive series nicknames beginning with the "Dash 7" of the 1970s, the C44-9W was dubbed the Dash 9 upon its debut in 1993.
The "Dash-9" GE 7FDL16AE Prime mover can be found in the following Locos:
Dash 9-40C
Dash 9-40CW
Dash 9-44CW
C44-9WL
C44-9WM
It is also very close to the following locos:
AC44C6M
AC44C4M
Dash 8-39B
Dash 8 40-B
Dash 8-40BW
Dash 8-39C
Dash 8-40C
Dash 8-40CM
Dash 8-40CW
Dash 8-41CW
Dash 8-44CW
C38EMi
C38AChe
AC4400CW
Some AC6000CW were built with 7FDL-16cyls and were later converted to 7HDL-16cyl. Some were never converted. Please refer to the prototype for reference.
Passenger Locos including: P40DC, and P42DC were built slightly different and contained HEP. For these engines plese use Select Sound file (73482) or V4.0 Sound file (74482).
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 GE 7FDL16AE
Uses our NEW-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Nathan K3HA (Duplicate horn due to space restrictions)
CV48=7 Leslie S3L #1
CV48=8 Leslie S5T
CV48=9 Nathan K5H
CV48=10 Nathan K5H (Duplicate horn due to space restrictions)
CV48=11 Nathan K5H (Duplicate horn due to space restrictions)
CV48=12 Nathan K5H (Duplicate horn due to space restrictions)
CV48=13 Nathan K5H (Duplicate horn due to space restrictions)
CV48=14 Nathan K5H (Duplicate horn due to space restrictions)
CV48=15 Nathan K5H (Duplicate horn due to space restrictions)
Bells:
CV48=0 GE Fast Steel Bell
CV48=64 Modern E-Bell
Add values from above for total CV48 value.
Default CV48 Value = 0
0 - GE 7FDL16AE
5 - Nathan K3HA
0 - GE Fast Steel Bell
Total 0+5+0 = 5
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Mit dem Herunterladen der gewünschten Datei stimmen sie ausdrücklich den oben genannten Lizenzbedingungen zu.