")}("width","220px",["/lib/bootstrap-select/css/bootstrap-select.min.css"],"rel=\u0022stylesheet\u0022 ");
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
This sound file was recorded from a real SD60E locomotive.
The SD60E program was designed to upgrade 1980's SD60s with current electronic controls and crash-worthiness upgrades in Norfolk Southern's Juniata shops in Altoona PA.
The rebuilds receive a Tier 0+ 16-710G3B prime mover rated at 4,000 hp, compared to the standard SD60's 3,800 hp. Along with the HP upgrade they also recieved all new wiring and EMD's EM2000 microprocessor controls. These new controls altered the notching slightly in these rebuilt locomotives.
This ESU Sound file will operate like the prototype in terms of throttle notching. You will notice there is low and high idle, and once above notch 3 and back to Idle the prime mover will stay up in high idle for a period of time. Once in low idle throttling up to notch 1 or notch 2 and return to idle will stay in low idle.
Prime Mover:
CV48=0 EMD 16cyl 710G3B SD60E Rebuild
Uses our NEW-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LAR24 *Default*
CV48=1 NS Nathan P135R24 (P5)
CV48=2 Nathan K5LLA
CV48=3 Leslie RS-5T (for NS 6920 and others)
CV48=4 Nathan P5
CV48=5 Nathan K3LA
CV48=6 Leslie RS3L
CV48=7 Leslie S3L
CV48=8 Leslie S5T
CV48=9 Nathan K5LA
CV48=10 Nathan K5LAR24
CV48=11 Nathan K5LAR24
CV48=12 Nathan K5LAR24
CV48=13 Nathan K5LAR24
CV48=14 Nathan K5LAR24
CV48=15 Nathan K5LAR24
Bells:
CV48=0 Steel Bell
CV48=64 Graham White E-Bell
Add values from above for total CV48 value.
Default CV48 Value = 64
0 - EMD 16cyl 710G3B SD60E Rebuild
0 - Nathan K5LAR24
64 - Graham White E-Bell
Total 0+0+64 = 64
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Hide description more…
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
The EMD 710 is a line of diesel engines built by Electro-Motive Diesel (EMD). Introduced in 1985, the 710 series replaced the earlier EMD 645 series. Since its introduction, EMD has continually upgraded the 710G diesel engine. Power output has increased from 3,800 horsepower on 1985's 16-710G3A to 4,500 horsepower on 2012's 16-710G3C-T2. Over the production span of certain locomotive models, upgraded engine models have been fitted when these became available. For example, an early 1994-built SD70MAC had a 16-710G3B, whereas a later 2003-built SD70MAC would have a 16-710G3C-T1.
This prime mover was recorded from an SD70MAC with a 16cyl 710G3B.
This would be correct for the following locomotives:
SD70
SD70M
SD70MAC
SD70I
SD60E (upgraded to 710G3B from 710G3A)
Though recorded from an SD70MAC it would be very close to the following locomotives:
SD50AF
GP60
GP60M
GP60B
SD60
SD60M
SD60I
SD60F
SD75M
SD75I
Austrailian National AN Class
SD90/43MAC
SD50X
GT46C
and others...
As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 3 bells included on this one sound profile! All changeable using CV48.
Graham White E-Bell is included on Sound Slot 9
Prime Mover:
CV48=0 EMD 16cyl 710G3B
Uses our NEW-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan K5LLA
CV48=3 Nathan P3
CV48=4 Nathan P5
CV48=5 Nathan K3LA
CV48=6 Leslie RS3L
CV48=7 Leslie S3L
CV48=8 Leslie S5T
CV48=9 Nathan K5H
CV48=10 Nathan K5HLL
CV48=11 Nathan K5H#2
CV48=12 Nathan K5H#2
CV48=13 Nathan K5H#2
CV48=14 Nathan K5H#2
CV48=15 Nathan K5H#2
Bells:
CV48=0 Steel Bell
CV48=64 Bronze Bell
Add values from above for total CV48 value.
Default CV48 Value = 75
0 - EMD 16cyl 710G3B
11 - Nathan K5H#2
64 - Bronze Bell
Total 0+11+64 = 75
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Hide description more…
If you download the designated file, you agree to be legally bound by the license given above.