")}("width","220px",["/lib/bootstrap-select/css/bootstrap-select.min.css"],"rel=\u0022stylesheet\u0022 ");
Die Baureihe 52 ist die mit fast 6800 Exemplaren meistgebaute deutsche Dampflokomotive. Sie ging aus der ab 1939 gebauten Einheitslok der Baureihe 50 hervor, deren Konstruktion mit Beginn des Zweiten Weltkriegs schrittweise vereinfacht wurde. Die mit fünf Treibachsen ausgestattete Zweizylinderlok war mit einer Höchstgeschwindigkeit von 80 km/h bei einer Achslast von nur 15,4 Tonnen selbst auf Nebenbahnen einsetzbar. Die Loks kamen vor Güter-und Personenzügen zum Einsatz. Während die 52 bei der DB bereits in den frühen 1950er-Jahren zugunsten der BR 50 aus dem Unterhaltungsbestand schieden, erfreuten sich die Loks bei der DR (teilweise rekonstruiert) und vielen europäischen Staatsbahnen eines langen Lebens. Beschreibung ausblenden mehr…
"Super-Atlantic": Die S 9 war eine Weiterentwicklung der S 7. Für noch mehr Leistung auf Entfernungen von mehr als 250 km. Damit ging sie als echte Langläuferin in die Lokomotivgeschichte ein. Beste Laufeigenschaften und ein leistungsfähiger Kessel machten aus der S 9 eine Langstreckenkönigin.
Rund 20 Jahre beherrschten die Lokomotiven der Achsfolge 2B (eine Lok mit vorlaufendem Drehgestell und zwei Treibachsen) den Schnellzug- und Personenzugdienst der Europäischen Eisenbahnen. Allein die preußische Staatsbahn hatte 3472 Maschinen dieser Achsfolge beschafft, die letzten davon erst im Jahr 1913.
Aber bereits an der Wende vom 19. zum 20. Jahrhundert wurden die Zuggewichte immer größer und die 2B Loks waren häufig an Ihrer Leistungsgrenze angelangt. Um auf den Loks einen leistungsfähigeren Kessel unterzubringen, musste eine weitere Laufachse angefügt werden. Damit war die Achsfolge 2B1, die sogenannte Atlantic geboren. Der Name dieser Lokbauart stammt vom ersten Betreiber solcher Loks, der Atlantic Coast Line in den USA.
Die Atlantic-Lokomotiven gelten unter Kennern als die elegantesten und formschönsten Dampfloks überhaupt, zudem waren sie wesentlich leistungsfähiger als ihre Vorgänger und extrem laufruhig. Daher konnten mit Atlantic Lokomotiven Geschwindigkeiten bis 200 km/h erreicht werden.
Die K.P.E.V. (Königlich Preußische Eisenbahn Verwaltungen) beschafften als erste Atlantic ab 1902 die Gattung S 7 in zwei Bauformen - die Hannoversche Bauform und die Graffenstadener Bauform, benannt jeweils nach den Lieferfirmen. Die Loks waren von hervorragender Laufruhe und leistungsfähiger als die bisherigen 2B-Loks, aber für die immer weiter steigenden Anforderungen bald nicht mehr leistungsfähig genug. Daher wurde beschlossen, die Hannoversche S 7 zu einer Art "Super- Atlantic" weiter zu entwickeln. So entstand die Gattung S 9. Sie wurde bei der Hanomag in Hannover konstruiert und gebaut, ab 1908 wurden 99 Stück geliefert.
Die S 9 hatte hervorragende Laufeigenschaften und war mit ihrem leistungsfähigen Kessel wie geschaffen für Schnellzüge im flachen Norddeutschland. Sie hatte eine zugelassene Höchstgeschwindigkeit von 110 km/h. Mit ihrem großen Tender waren Langläufe über eine Entfernung von mehr als 250 km möglich. Nebenbei war sie auch optisch sehr gelungen und gilt als eine der schönsten preußischen Lokomotiven.
Es verwundert allerdings, dass bei diesen Loks nicht das damals schon bewährte Heissdampfverfahren angewendet wurde. Man wollte diesen Fehler im Jahr 1914 korrigieren und die Loks mit neuen Heissdampfkesseln ausrüsten. Der Ausbruch des Ersten Weltkriegs verhinderte dies und nur zwei Loks wurden umgebaut. Diese waren jedoch noch leistungsfähiger geworden.
Nach dem Ersten Weltkrieg mussten 17 Loks nach Belgien und vier an französische Bahnen abgegeben werden. Von den übrigen Loks wurden nur noch drei von der Deutschen Reichsbahn übernommen und 1925 in die Baureihe 14.0 eingereiht, aber bereits kurz danach ausgemustert. Damals bestand in Deutschland kein Bedarf an Lokomotiven, die leichte Züge mit hohen Geschwindigkeiten befördern konnten.
Die belgische Staatsbahn setzte ihre S 9 jedoch weiterhin mit großem Erfolg ein, erst nach dem Zweiten Weltkrieg wurden dort die letzten S 9 ausgemustert - auch ein Beweis für deren Leistungsfähigkeit und gute Konstruktion. Beschreibung ausblenden mehr…
Equipped with ESU "FULL THROTTLE STEAM" features!
MUST use LokProgrammer Version 4.5.1 or newer.
The 2-8-2 wheel configuration on steam locomotives was one of the most highly used configurations made. This type of locomotive with 2 pilot wheels, 8 drive wheels, and 2 trailing wheels to support a larger firebox was first built for the Emperor of Japan, thus the name Mikado type. The first Mikado built for service in the US was built in 1901 and was owed by the Bismarck, Washburn and Great Falls until 1904 when it was acquired by the Soo Line.
This recording comes from the newer L-1 Class SOO Line 2-8-2 #1003. The SOO #1003 is a very average 2-8-2 not much different than the USRA light Mikado design. It does have slightly larger cylinders and a boiler pressure of about 170 PSI.
Originally delivered with a Westinghouse Cross Compound Air Pump, Walschaerts valve gear, an oil headlight, and a manual Johnson Bar, it was gradually upgraded to include a Power Reverse gear and electric headlights and class lights by about 1920.
It is important to note that wheel arrangement does very little to change the sounds of a steam locomotive. (Articulation aside). Boiler pressure, Stack size, Cylinder size and even the engineer at the throttle can all have more effect on the sound of locomotive than how many wheels are beneath it. While our dedication to accuracy is paramount, causing us to release very specific files, we will also be releasing some more generic files to try to give broad range to locomotives owned by MANY railroads. While this is a fairly common design and the sounds are similar to many locomotives, this ESU Full Throttle File is quite specific to the SOO #1003. We've included a few extra whistles for some variation.
The ESU Full Throttle Steam files now include a few new logic features for added operational realism while still leaving you in control of HOW you wish to run your locomotive.
Heavy Load: F9 by default.
Similar to the “Drive Hold” button on the Full Throttle Diesel files “Heavy Load” allows you to adjust the “Steam Cut Off Valve” at any speed allowing for a fierce full chuff or drifting with snifters and rod clanks. Heavy load can also act as an offset allowing speed adjustments when engaged if desired.
Coast: F4 by default.
Opposite of “Heavy Load” Coast allows for a negative offset allow drifting sounds of Rods and snifter valves at any speed. You again have the option to hold the speed to adjust the speed with this offset active. Even allowing for an increase of speed with no chuffs as if drifting downhill.
Grade Crossing: Sequence. F22 by default.
Allowing 1 button push to play a “pre made” grade crossing cycles with variable lengths and whistle play.
Independent brake: F10 by default
Identical to the Full Throttle Diesel files this is a custom feature created by using logic inside sound slot 11. This allows for the locomotive to stop more quickly than its regular momentum would normally carry it. This one is pretty self-explanatory – just press the brake and come to a stop!
Articulation: Sound Slot 2
By adding Sound Slot 2 to the F8 Function Mapping you can add a second set of drivers making any ESU Steam File articulated.
Function Mappable Air Horn: F21 by default
Sound Slot 21.
Many Steam locomotives had a single chime airhorn equipped. Those modelling SP, MILW, and others can now have this feature and put it where they would like in the function mapping in addition to the whistle.
As with all SELECT decoders there are multiple, bells included on this one sound profile! All changeable using CV48.
Chuff Set:
CV48=0 SOO Line #1003 2-8-2 W/ Power Reverse-Rod Clank
CV48=16SOO Line #1003 2-8-2 W/ Power Reverse-Snifters
Whistles:
CV48=0 SOO Line Six Chime from #1003 - Default
CV48=1 CPR #2317
CV48=2 CNR 6 Chime from Conway Scenic #4740
CV48=3 PRR Banshee
Bells:
CV48=0 SOO #1003 Rope Pull - Default
CV48=64 SOO #1003 Air Ringer
Default CV48 Value = 0
0 - SOO Line 2-8-2 Mikado #1003
0 - SOO Line Six Chime from #1003
0 - SOO Line #1003 Rope Pull Bell
For more info please see the "Full Throttle Steam" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Equipped with ESU "FULL THROTTLE STEAM" features!
MUST use LokProgrammer Version 4.5.1 or newer.
The 2-8-2 wheel configuration on steam locomotives was one of the most highly used configurations made. This type of locomotive with 2 pilot wheels, 8 drive wheels, and 2 trailing wheels to support a larger firebox was first built for the Emperor of Japan, thus the name Mikado type. The first Mikado built for service in the US was built in 1901 and was owed by the Bismarck, Washburn and Great Falls until 1904 when it was acquired by the Soo Line.
This recording comes from the newer L-1 Class SOO Line 2-8-2 #1003. The SOO #1003 is a very average 2-8-2 not much different than the USRA light Mikado design. It does have slightly larger cylinders and a boiler pressure of about 170 PSI.
Originally delivered with a Westinghouse Cross Compound Air Pump, Walschaerts valve gear, an oil headlight, and a manual Johnson Bar, it was gradually upgraded to include a Power Reverse gear and electric headlights and class lights by about 1920.
It is important to note that wheel arrangement does very little to change the sounds of a steam locomotive. (Articulation aside). Boiler pressure, Stack size, Cylinder size and even the engineer at the throttle can all have more effect on the sound of locomotive than how many wheels are beneath it. While our dedication to accuracy is paramount, causing us to release very specific files, we will also be releasing some more generic files to try to give broad range to locomotives owned by MANY railroads. While this is a fairly common design and the sounds are similar to many locomotives, this ESU Full Throttle File is quite specific to the SOO #1003. We've included a few extra whistles for some variation.
The ESU Full Throttle Steam files now include a few new logic features for added operational realism while still leaving you in control of HOW you wish to run your locomotive.
Heavy Load: F9 by default.
Similar to the “Drive Hold” button on the Full Throttle Diesel files “Heavy Load” allows you to adjust the “Steam Cut Off Valve” at any speed allowing for a fierce full chuff or drifting with snifters and rod clanks. Heavy load can also act as an offset allowing speed adjustments when engaged if desired.
Coast: F4 by default.
Opposite of “Heavy Load” Coast allows for a negative offset allow drifting sounds of Rods and snifter valves at any speed. You again have the option to hold the speed to adjust the speed with this offset active. Even allowing for an increase of speed with no chuffs as if drifting downhill.
Grade Crossing: Sequence. F22 by default.
Allowing 1 button push to play a “pre made” grade crossing cycles with variable lengths and whistle play.
Independent brake: F10 by default
Identical to the Full Throttle Diesel files this is a custom feature created by using logic inside sound slot 11. This allows for the locomotive to stop more quickly than its regular momentum would normally carry it. This one is pretty self-explanatory – just press the brake and come to a stop!
Articulation: Sound Slot 2
By adding Sound Slot 2 to the F8 Function Mapping you can add a second set of drivers making any ESU Steam File articulated.
Function Mappable Air Horn: F21 by default
Sound Slot 21.
Many Steam locomotives had a single chime airhorn equipped. Those modelling SP, MILW, and others can now have this feature and put it where they would like in the function mapping in addition to the whistle.
For more info please see the "Full Throttle Steam" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/ Beschreibung ausblenden mehr…
Mit dem Herunterladen der gewünschten Datei stimmen sie ausdrücklich den oben genannten Lizenzbedingungen zu.