Showing items 81 - 90 of 237

SD40-2  LokSound 5 factory equipped sounds N XL L M4

Between 1972 and 1984 Electro-Motive Divison of General Motors manufactured 3950 samples of diesel-electric SD 40-2 for allmost each american Class 1 railroad. A 16 cylinder two-stroke diesel motor developed 3000 hp and enable the six axle road freight units to reach a maximum speed of 105 km/h.
This file is setup for ESU SD40-2, "BNSF and "Norfolk Southern" version. more…

SD40-2 CR  LokSound 5 factory equipped sounds N XL L M4

Between 1972 and 1984 Electro-Motive Divison of General Motors manufactured 3950 samples of diesel-electric SD 40-2 for allmost each american Class 1 railroad. A 16 cylinder two-stroke diesel motor developed 3000 hp and enable the six axle road freight units to reach a maximum speed of 105 km/h. This file is setup for ESU SD40-2, "CONRAIL" version. more…

EMD 8cyl 645E (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

Recorded from an SW1000

The EMD 645 family of diesel engines were designed and manufactured by the Electro-Motive Division of General Motors. The 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. The 645 series engines entered production in 1965. All 645 engines utilize forced induction, with either a Roots blower or a turbocharger. The 645 series has a maximum engine speed of between 900 and 950 more…

Big Boy 4-8-8-4  LokSound Select Retail Soundfiles H0 N XL L M4

During the late 1930s, the Union Pacific often used helpers to move trains from Ogden to Wasatch. The UP wanted to simplify this move so they asked their "Department of Research and Mechanical Standards" (DoRMS) to design a locomotive that could pull a 3600 ton train unassisted over the 1.14% grade of the Wasatch.
The designers determined that to pull a 3600 ton train, a tractive effort of 135,000 lbs would be needed. Assuming a factor of adhesion of 4.0, the weight on drivers would have to be more…

GE 16cyl 7FDL Modern (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the Locomotives.

GE's AC series of more…

ALCO 12cyl 251B (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 1800 horsepower 12cyl version of the 251B more…

GE Cat-44  LokSound Select Retail Soundfiles H0 N XL L M4

The GE 44-ton switcher is a 4-axle diesel-electric locomotive built by General Electric between 1940 and 1956. The locomotives were available with a choice of prime movers. Most were built with a pair of Caterpillar Inc.'s D17000 V8 180 horsepower (134 kW) engines. It was designed for industrial and light switching duties, often replacing steam locomotives that had previously been assigned these chores. This locomotive's specific 44-short ton weight was directly related to one of the more…

Baldwin 606SC_606A  LokSound Select Retail Soundfiles H0 N XL L M4

Baldwin 606SC and 606A Prime Movers were used in quite a few Baldwin prototypes.
DS-4-4-1000, RS-12, S-12, DRS-6-4-1000, DRS-4-4-1000, DR-6-2-1000, DT-6-6-2000, RT-624, DR-6-4-2000, DR-6-2-1000.

Though not quite correct the 606SC/606A Prime Mover sounds very similar to the 608SC/608A Prime movers This would be appropriate for:
DRS-6-4-1500, DRS-4-4-1500, DRS-6-6-1500, AS-416, AS-16, AS-616, DR-6-4-1500, DR-4-4-1500 and the RF-16(Sharknose).

As with all Select decoders there are also 16 more…

Baldwin 608A (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The Baldwin RF-16 was a 1,600-horsepower cab unit-type diesel locomotive built for freight service by the Baldwin Locomotive Works between 1950 and 1953. All RF-16s were configured with a B-B wheel arrangement and ran on two AAR Type B two-axle road trucks, with all axles powered. A total of 109 cab-equipped A units were built, along with 51 cabless booster B units, for a total of 160 locomotives built. more…

ALCO 12cyl 251C3 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in marine, generator and locomotive uses.

The 2000 Horsepower 12cyl 251C can be found in more…