Showing items 1 - 10 of 33

Atlas SD26  LokSound 5 North American & Australian factory Equipped Sound files N XL L M4

Atlas SD26
Jan 2022

Between 1981 and 1983 Chessie rebuilt 67 EMD GP30 locomotives.
These were B&O and C&O GP30 units that went through Chessie's rebuilding program at both the Huntington and Cumberland shops. After rebuilding Chessie did not renumber the units, but CSX decided to give them their own number series once they took ownership.

GP-30Ms were internally rewired with some modular components similar to Dash 2 units. They also recieved new IDAC wheel slip control, D77 traction motors, more…

BR 218 BLAU  LokSound 5 factory equipped sounds N XL L M4

After stricter exhaust gas values had been in effect since the early 1990s, it was clear that the 218 that were due for reengineering can no longer be equipped with the exhaust-optimized 12-cylinder diesel engine 12 V 956 TB11, as this no longer complied with the limit values. MTU therefore took the previous engine block from the TB11 and changed the electronics. The blue paintwork also makes the new motor look different from its gray predecessor. The soundscape of the two TB11 versions differs more…

BR 218 BLAU  LokSound 5 factory equipped sounds N XL L M4

After stricter exhaust gas values had been in effect since the early 1990s, it was clear that the 218 that were due for reengineering can no longer be equipped with the exhaust-optimized 12-cylinder diesel engine 12 V 956 TB11, as this no longer complied with the limit values. MTU therefore took the previous engine block from the TB11 and changed the electronics. The blue paintwork also makes the new motor look different from its gray predecessor. The soundscape of the two TB11 versions differs more…

KG230 A12L-714  LokSound 5 factory equipped sounds N XL L M4

From 1962 Deutz offered the two-axle dieselhydraulic KG 230 B in the power class of a Köf III. KG stands for small locomotive with cardan shaft drive, 230 for the power in PS and B for the wheel arrangement. The in-house air-cooled twelve-cylinder engine A12L714 developed 230 hp at 2000 rpm. The seven KG 230s built for explosion-sensitive plants were not equipped with a water-cooled six-cylinder diesel engine. The gears of most locomotives were set to a maximum speed of between 20 and 30 km / h more…

EMD 16cyl 645C (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

As the EMD 567s got worn, Many Railroads underwent rebuild programs to prolong the life of their locomotives. One Program in particular was the Uceta GP-16 program on the SCL. Starting in 1979 they took many of their GP7s, GP9s, and GP18s and replaced the existing 567 prime movers with 16cyl 645C Power Assemblies. This combination resulted in a unique sound never before released in the Model Railroad more…

EMD 16cyl 567C GP10 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

The Paducah GP10s were the result of a rebuild program upgrading GP7, GP8 and GP18 EMD locomotives. Unlike the GP16 program which recieved 645 power assemblies the GP10s retained a 567 16cyl prime mover. Now using a 567C block, a 4 stack exhaust was applied in most cases. Many smaller railroads still use GP10s and it was deemed a rather successful program.

As with all SELECT decoders there are up to 16 more…

GE ET44C4 Tier 4 GEVO (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Introduced in 2012, General Electric's Tier 4 GEVo Series represents the latest in diesel-electric locomotive technology. The GE Tier 4 GEVo is designed to meet increasingly stringent Environmental Protection Agency (EPA) emissions regulations.

The EPA “Tier” emissions standards are a series, or Tiers, of allowable emissions levels based upon a locomotives’ date of manufacture. The highest and most more…

GE ET44AC Tier4 GEVO V2 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Introduced in 2012, General Electric's Tier 4 GEVo Series represents the latest in diesel-electric locomotive technology. The GE Tier 4 GEVo is designed to meet increasingly stringent Environmental Protection Agency (EPA) emissions regulations.

The EPA “Tier” emissions standards are a series, or Tiers, of allowable emissions levels based upon a locomotives’ date of manufacture. The highest and most more…

GMD 12cyl 645C (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

As the EMD 567s got worn, Many Railroads underwent rebuild programs to prolong the life of their locomotives. One Program in particular was the Uceta GP-16 program on the SCL. Starting in 1979 they took many of their GP7s, GP9s, and GP18s and replaced the existing 567 prime movers with 16cyl 645C Power Assemblies. This combination resulted in a unique sound never before released in the Model Railroad more…

EMD 16cyl 645BC GP16 (FT)  LokSound Select Retail Soundfiles H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

The Uceta GP16s were the result of a Seaboard Coast Line rebuild program upgrading GP7, GP9 and GP18 EMD locomotives. Unlike the GP10 program which retained a 567 16cyl prime GP16s recieved 645 power assemblies. A 4 stack exhaust was also applied in most cases. Many smaller railroads still use GP16s and it was deemed a rather successful program.

As with all SELECT decoders there are up to 16 separate more…