Manufacturer: ESU electronic solutions ulm, Item number: 74426, Version: V4-R4
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
The EMD 645 family of diesel engines were designed and manufactured by the Electro-Motive Division of General Motors. The 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. The 645 series engines entered production in 1965. All 645 engines utilize forced induction, with either a Roots blower or a turbocharger. The 645 series has a maximum engine speed of between 900 and 950 revolutions per minute (rpm), an increase over the 800 to 900 rpm maximum speed for the 567 series.
Locomotives:
GP38
GP38AC
GP38-2
GP38-2L
GP38-2W
SD38
SD38-2
NSWGR 422 Class
Victorian Railways X Class
EMD G26
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/
Key | Functions | Sound slots | Volume CVs | Volume values |
---|---|---|---|---|
F0 | Directional Headlights | |||
F1 | Bell | 4 | 283 | 50 |
F2 | Playable Airhorn | 3 | 275 | 128 |
F3 | Coupler | 5 | 291 | 128 |
F4 | Dynamic Brake | 6 | 299 | 90 |
F5 | AUX3 (Rotary Beacon) | |||
F6 | AUX1 + AUX2 (Front Ditchlights) | |||
F7 | Switching Mode | |||
F8 | Sound (On/Off) | 1 | 259 | 128 |
F9 | Drive Hold | 2 | 267 | 128 |
F10 | Independent Brake | 11 | 339 | 20 |
F11 | Radiator (Fan) Sound | 8 | 315 | 50 |
F12 | Dimmer (Headlights) | |||
F13 | AUX4 (Rear Ditchlights) | |||
F14 | N/A | |||
F15 | Fast Spitter Valve | 15 | 371 | 50 |
F16 | Spitters on Shutdown | |||
F17 | Brake Set / Brake Release | |||
F18 | Sanding Valve | 13 | 355 | 128 |
F19 | Short Air Let Off | 14 | 363 | 128 |
F20 | Compressor | 7 | 307 | 50 |
F21 | Slow Spitter Valve | 17 | 387 | 50 |
F22 | N/A | |||
F23 | N/A | |||
F24 | N/A | |||
F25 | N/A | |||
F26 | N/A | |||
F27 | N/A | |||
F28 | N/A |
Make sure that index CV31 is set to 16 and index CV32 is set to 1 before changing a volume CV.