Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer
The EMD 567 family of Prime Mover was one of the most widely used in the world! From F-Units to Geeps this popular power house can still be found in many locomotives riding the rails today. Our EMD 12cyl version of the 567C would be appropriate for the following locomotives:
Although the following locomotives used a slightly different variation of the EMD 12cyl 567, our sound file would be acceptable in the following as well:
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
|Key||Functions||Sound slots||Volume CVs||Volume values|
|F5||AUX3 (Rotary Beacon)|
|F6||AUX1 + AUX2 (Front Ditchlights)|
|F11||Radiator (Fan) Sound||8||315||50|
|F13||AUX4 (Rear Ditchlights)|
|F15||Fast Spitter Valve||15||371||50|
|F16||Spitters on Shutdown|
|F17||Brake Set / Brake Release|
|F19||Short Air Let Off||14||363||128|
|F21||Slow Spitter Valve||17||387||50|
Make sure that index CV31 is set to 16 and index CV32 is set to 1 before changing a volume CV.