Einträge 31 - 40 von 60

Atlas ALP-45DP H0 N XL L M4

Atlas ALP45DP
www.atlasrr.com

The ALP-45DP is a “dual mode” locomotive, capable of drawing power from either overhead electrical wires or its own pair of 12-cylinder Caterpillar diesel engines. These flexible locomotives were designed to provide a one-seat commute from NJ TRANSIT’s various diesel-only lines into the electrified territory that leads to New York City’s Penn Station. This fulfills the requirement of not operating diesels through the North River Tunnels and within the subterranean mehr…

EMD 16cyl 645E3 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

OEM File:
Bowser GMD SD40-2
Updated with Bronze Bell

As with all SELECT decoders there are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.

Prime Mover:
CV48=0 EMD 16cyl 645C

Uses our INTERMEDIATE-HORNS-AND-BELLS template...

Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast mehr…

Turbine-B Unit RC H0 N XL L M4

ScaleTrains.com
Big Blow Turbine B Unit
Rivet Counter Version ONLY.

This file is for a LokSound SELECT decoder. It was made to be used in tandem with LokSound Select file 97438 (Scale Trains Rivet Counter Turbine A Unit)
This file WILL NOT work in Museum Quality Scale Trains Turbines.

Turbine-A Unit RC H0 N XL L M4

ScaleTrains.com
Big Blow Turbine A Unit
Rivet Counter Version ONLY.

This file is for a LokSound SELECT decoder. It was made to be used in tandem with LokSound Select file 97439 (Scale Trains Rivet Counter Turbine B Unit)
This file WILL NOT work in Museum Quality Scale Trains Turbines.



CV48 Sound Options/ Alternate Horns and Bells
Your New Turbine will come to you with the Correct Leslie S5T-RF Horn and GE Bell right out of the box. But in case you would like to hear a different horn or mehr…

Turbine-B Unit MQ H0 N XL L M4

ScaleTrains.com
Big Blow Turbine B Unit
Museum Quality Version ONLY.

This file is for a LokSound V4.0 decoder. It was made to be used in tandem with LokSound V4.0 file 93493 (Scale Trains Museum Quality Turbine A Unit)
This file WILL NOT work in Rivet Counter Scale Trains Turbines.

Turbine-A Unit MQ H0 N XL L M4

Scale Trains
Big Blow Turbine A Unit
Museum Quality Version ONLY

CV48 Sound Options/ Alternate Horns and Bells
Your New Turbine will come to you with the Correct Leslie S5T-RF Horn and GE Bell right out of the box. But in case you would like to hear a different horn or bell sound we have provided an assortment.

Horns:
CV48=0 Dual Leslie A200
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5A
CV48=5 Leslie S2M
CV48=6 Leslie RS3L
CV48=7 Leslie S3L
CV48=8 Leslie mehr…

GE U18B H0 N XL L M4

Intermountain GE U18B 8Cyl 7FDL

Alco 244 12Cyl H0 N XL L M4

Well over 1,300 RS-3 road-switcher locomotives were built by ALCO between 1950 and 1956. It can be considered one of the most successful four-axle diesel road-switchers ever produced by the builder. These 1,600hp locomotives were powered by an ALCO 244 V-12 engine which was complimented by rugged GE electrical components. The RS-3 was truly a versatile locomotive. It could be found in virtually every type of service from passenger and commuter runs to heavy-haul and local freight assignments.

ALCO 251-16 W/Air Start H0 N XL L M4

Bowser C-430 Alco 251-16 with Air Start

IMRC GE GEVO-12 H0 N XL L M4

Intermountain Gevo