Showing items 91 - 100 of 106

GE 16cyl FDL Dash 7 V2(FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

Recorded from a B36-7.

The GE FDL-16 prime mover was first used in 1959 in the General Electric U25B locomotive. Over the years little changed in terms of sound until the "Dash-8" series of GE locomotives was introduced. Known for their throaty chug and shaft driven compressor (rather than the more modern “Whoop” electric compressor). There was an interim period following the "U Boats" that began the era in GE called the "Dash-7s". During this time more…

GE 16cyl FDL Early V3(FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Third version of this popular locomotive. This one recorded from a GE U30C

The GE FDL-16 prime mover was first used in 1959 in the General Electric U25B locomotive. Over the years little changed in terms of sound until the "Dash-8" series of GE locomotives was introduced. Known for their throaty chug and shaft driven compressor (rather than the more modern “Whoop” electric compressor) , the following GE more…

GE 7FDL16AE (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Recorded from a CW44-9

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the more…

GE ET44AC Tier4 GEVO V2 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Introduced in 2012, General Electric's Tier 4 GEVo Series represents the latest in diesel-electric locomotive technology. The GE Tier 4 GEVo is designed to meet increasingly stringent Environmental Protection Agency (EPA) emissions regulations.

The EPA “Tier” emissions standards are a series, or Tiers, of allowable emissions levels based upon a locomotives’ date of manufacture. The highest and most more…

GMD 12cyl 645C (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

As the EMD 567s got worn, Many Railroads underwent rebuild programs to prolong the life of their locomotives. One Program in particular was the Uceta GP-16 program on the SCL. Starting in 1979 they took many of their GP7s, GP9s, and GP18s and replaced the existing 567 prime movers with 16cyl 645C Power Assemblies. This combination resulted in a unique sound never before released in the Model Railroad more…

GMD 16cyl 645E3B (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

V4-Fourth Version of this Popular Prime mover!
Recorded from a GMD SD40-2W

The EMD 645 series engine was an evolution of the earlier 567 series and a precursor to the later 710 series. When the 645 prime mover entered production in 1965, a large series of new locomotive models were introduced. The turbocharged version was used in EMD's 40 Series (GP40, SD40 and SD45) in 3,000 horsepower (2,200 kW), more…

Goodwin Alco 6cyl 251B (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

48/830 Class Goodwin Alco 6cyl 251B
Recorded by Jay Blanch of Notch 8 Precision Models

The 48 Class are a class of diesel locomotives built by AE Goodwin, Auburn for the New South Wales Government Railways between 1959 and 1970. Once the most ubiquitous locomotive in New South Wales, Australia, they are based on Alco frames and prime movers, using General Electric (later Associated Electrical Industries) electrical equipment. The South Australian more…

Goodwin/Alco 12cyl 244 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Recorded from 4306 at the Rail Transport Museum at Thirlmere.
**Please Note**
Responding to user feedback this file uses "Standard North American Function Mapping".

This is a template used for all Diesel files from ESU LLC.
While we realize most Australian Locomotives do not use Bells they are included in the mapping due to the template used. This is easily changable so the user can set the function more…

Hunslet 2-6-0 Z27 Class (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE STEAM" features!
MUST use LokProgrammer Version 4.5.1 or newer.

N.S.W.G.R. Class Z27 2705

**Please Note**
Responding to user feedback this file uses "Standard North American Function Mapping".

This is a template used for all steam files from ESU LLC.
While we realize most Australian Locomotives do not use Bells or Air Horns they are included in the mapping due to the template used. This is easily changable so the user can set the function mapping work as more…

MLW 12cyl 251B (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!

Recorded from an MLW RS-18

The ALCO 251 prime mover was the most popular and abundant prime mover ever made by the company. While it proved to be quite successful, it sadly outlived its original manufacturer, ALCO who closed their doors in 1969. The 251 prime mover is actually still available to purchase today from Fairbanks Morse for use in Marine, Generator, and locomotive uses.

The 1800 horsepower 12cyl version of the 251B could be found in the more…