Showing items 61 - 70 of 110

EMD 16cyl 710G3C-T2 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The EMD 710 is a line of diesel engines built by Electro-Motive Diesel (EMD). Introduced in 1985, the 710 series replaced the earlier EMD 645 series. Since its introduction, EMD has continually upgraded the 710G diesel engine. Power output has increased from 3,800 horsepower on 1985's 16-710G3A to 4,500 horsepower on 2012's 16-710G3C-T2. Over the production span of certain locomotive models, upgraded more…

GE GEVO-12 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

GE Evolution 12cyl "GEVO" locomotives have a 4 stoke diesel engine and have been designed to be more efficient and more emission friendly than previous models. Evolution Series locomotives are equipped with either AC or DC traction motors, depending on the customer's preference, though admittedly there is little sound difference if any between the two.

All early GEVOs were delivered with a Nathan more…

GE 8cyl 7FDL (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The GE U18B was introduced by GE as a branch line roadswitcher in 1973. Easy to spot due to its relatively short length — 54 ft 8 in (16.66 m) — it was the only North American locomotive powered by the 8-cylinder FDL engine.

There were some export locomotives built with this prime mover:
SG10B, U15C, U17C, U20C, and the C18-7i

The U18B was not well recieved as only 5 railroads bought the locomotive, more…

EMD 12cyl 567C (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The EMD 567 family of Prime Mover was one of the most widely used in the world! From F-Units to Geeps this popular power house can still be found in many locomotives riding the rails today. Our EMD 12cyl version of the 567C would be appropriate for the following locomotives:

SW-1200
GMD1
LWT12 (Aerotrain)

Although the following locomotives used a slightly different variation of the EMD 12cyl 567, our more…

BaldwinVO-1000 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Locomotives:
VO-1000

Please note: Some VO-1000's had a Steam Engine type bell. We have included 2 different Bells for this. Some were rope pull, CV 48 Bell Value 64. And Some were Air Operated. For the Air Operated Steam Loco Bell please set the following CVs:

CV31 = 16, CV32 = 2
----------------------
CV302 = 0
CV304 = 32

New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to more…

GE 16cyl FDL Early (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The GE FDL-16 prime mover was first used in 1959 in the General Electric U25B locomotive. Over the years little changed in terms of sound until the "Dash-8" series of GE locomotives was introduced. Known for their throaty chug and shaft driven compressor (rather than the more modern “Whoop” electric compressor) , the following GE locomotives used the early 16cyl FDL prime more…

EMD 16cyl 567D3 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The 567 prime mover is a line of medium-speed diesel engines manufactured by GM Electro-Motive Division. They were used in many EMD locomotives from 1938-1966 when it was replaced by the EMD 645. The 567 proved to be exceptionally successful in passenger, switching, freight, marine and stationary services. The 16 cylinder 567D3 variation was used in the following...

Locomotives:
GP30
SD24

Although more…

EMD 12cyl 645E (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The EMD 645 family of diesel engines were designed and manufactured by the Electro-Motive Division of General Motors. The 645 series was an evolution of the earlier 567 series and a precursor to the later 710 series. The 645 series engines entered production in 1965. All 645 engines utilize forced induction, with either a Roots blower or a turbocharger. The 645 series has a maximum engine speed of more…

Dual EMD 12cyl 567C (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

First made in the late 1930's the EMD 12cyl 567 Prime Movers were the power houses in many of EMD's Switchers. At the same time EMD found they could put 2 of these Prime movers together in one carbody to create a more powerful locomotive. Often geared for passenger service the E Units were created.

Locomotives:
E3
E4
E5
E6
E7
E8
E9

New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to more…

Dual EMD 16cyl 645E3A (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

The Dual EMD 16cyl 645E3A prime movers were used in Union Pacific's DDA40X locomotive. Each of the two prime mover provides 3,300 hp. The DDA40X is the most powerful single-unit locomotive ever built.

As the DDA40X program was a test, a number of experiments were conducted during the service life of these locomotives. One such test included fitting a few of the units with air raid sirens to warn more…