Showing items 81 - 90 of 96

GE 16cyl FDL Early V3(FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Third version of this popular locomotive. This one recorded from a GE U30C

The GE FDL-16 prime mover was first used in 1959 in the General Electric U25B locomotive. Over the years little changed in terms of sound until the "Dash-8" series of GE locomotives was introduced. Known for their throaty chug and shaft driven compressor (rather than the more modern “Whoop” electric compressor) , the following GE more…

GE 7FDL H0 N XL L M4

There has been mass confusion on the GE 7FDL and GE FDL designations. From our research we have found that the prefix "7" lumps the engine into the GE category of large rotating machinery, the same prefix is used on their Generators and Alternators. The "7" prefix was not used until GE purchased the design from Cooper-Bessemer.” Of course different exhausts, body styles and other factors will cause engines to sound different.
This file contains 16 Airhorns accessible by changing CV48 values more…

GE 7FDL 16 cyl H0 N XL L M4

There has been mass confusion on the GE 7FDL and GE FDL designations. From our research we have found that the prefix "7" lumps the engine into the GE category of large rotating machinery, the same prefix is used on their Generators and Alternators. The "7" prefix was not used until GE purchased the design from Cooper-Bessemer.” Of course different exhausts, body styles and other factors will cause engines to sound different.
This file contains 16 Airhorns accessible by changing CV48 values more…

GE 7FDL A Modern H0 N XL L M4

There has been mass confusion on the GE 7FDL and GE FDL designations. From our research we have found that the prefix "7" lumps the engine into the GE category of large rotating machinery, the same prefix is used on their Generators and Alternators. The "7" prefix was not used until GE purchased the design from Cooper-Bessemer.” Of course different exhausts, body styles and other factors will cause engines to sound different.
This file contains 16 Airhorns accessible by changing CV48 values more…

GE 7FDL16AE (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Recorded from a CW44-9

In the Mid 1980s GE changed it's 16cyl FDL design to include a different exhaust silencer, a new electric compressor often known as the "Whoop compressor" and changed some of the electronics of their locomotives. These differences among a few other led to a distinct change in the sounds from the GE 16cyl FDL often found from the U25Bs on through the Dash-7 series of the more…

GE Cat-44 H0 N XL L M4

The GE 44-ton switcher is a 4-axle diesel-electric locomotive built by General Electric between 1940 and 1956. The locomotives were available with a choice of prime movers. Most were built with a pair of Caterpillar Inc.'s D17000 V8 180 horsepower (134 kW) engines. It was designed for industrial and light switching duties, often replacing steam locomotives that had previously been assigned these chores. This locomotive's specific 44-short ton weight was directly related to one of the more…

GE ET44AC Tier4 GEVO V2 (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.4.21 or newer

Introduced in 2012, General Electric's Tier 4 GEVo Series represents the latest in diesel-electric locomotive technology. The GE Tier 4 GEVo is designed to meet increasingly stringent Environmental Protection Agency (EPA) emissions regulations.

The EPA “Tier” emissions standards are a series, or Tiers, of allowable emissions levels based upon a locomotives’ date of manufacture. The highest and most more…

GE FDL-12Cyl H0 N XL L M4

The GE FDL-12Cyl Prime Mover is different from the 7FDL Prime movers. The 7FDL were used in the "-7" series locomotives. FDL's were used primarily in the "U" Series Locomotives. In most cases the the FDL series was not used in locomotives built from 1977 forward.

Examples can be found in the following prototypes:
U23B, U23C, UD18, U26C, and dual prime mover version U50C

This file contains 16 Airhorns accessible by changing CV48 values 0-15

GE P42 H0 N XL L M4

The GE "Genesis" series of Locomotives was developed to be the main locomotives for Amtrak. Amtraks EMD F40PH locomotives were aging fast and GE came to the rescue with a more powerful and more fuel efficient design. Some P42 Locomotives were built with a Dual Mode capability utilizing a 3rd Rail shoe for collecting electricity. These engines run on the North East Corridor on Amtrak and on Metro North. The ESU version is the DC model which is much more common. It can be used to represent the more…

GMD 12cyl 645C (FT) H0 N XL L M4

Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.1 or newer

As the EMD 567s got worn, Many Railroads underwent rebuild programs to prolong the life of their locomotives. One Program in particular was the Uceta GP-16 program on the SCL. Starting in 1979 they took many of their GP7s, GP9s, and GP18s and replaced the existing 567 prime movers with 16cyl 645C Power Assemblies. This combination resulted in a unique sound never before released in the Model Railroad more…