")}("width","220px",["/lib/bootstrap-select/css/bootstrap-select.min.css"],"rel=\u0022stylesheet\u0022 ");
The Bavarian P3/5 H (later BR 38.4) from 1921 is considered a successful design, but with only 80 units built, it was not nearly as widespread as its Prussian counterpart, the P8. Manufacturer J.A. Maffei took over the four-cylinder engine from its predecessor, the P3/5 N, but designed the three-coupler as a superheated steam locomotive. In combination with the wheel diameter of 1640 mm, the 1200 hp locomotive, later known as the BR 38.4, reached a top speed of 90 km/h. Due to its impressive more…
In 1935, Borsig developed the 2'C2' engines 05 001 and 002, which were equipped with streamlined cladding, for the Deutsche Reichsbahn-Gesellschaft (DRG) to pull light express trains at speeds of over 140 km/h. A third locomotive was given an enclosed driver's cab and was coupled to the tender at the smokebox end. The three-cylinder engine developed 2360 hp and accelerated the racers to 175 km/h. During test runs, 05 002 reached 200.4 km/h with a 197-ton test train, making it the fastest German more…
In the early 1900s, the Royal Bavarian State Railways wanted to rationalize operations on its less busy local railway lines by purchasing small locomotives suitable for one-man operation. The most successful was the PtL2/2 design submitted by Krauss, with 29 units built, which was popularly known as the Glaskasterl (Glass Box) due to its large driver's cab. Krauss delivered three locomotives to the Prussian KPEV also. Two further series of 13 units followed with identical boiler and cylinders, more…
In the early 1930s, the Deutsche Reichsbahn-Gesellschaft DRG included a light 1’B1’ tender locomotive for branch lines in its standard locomotive program as a replacement for light regional railway tender locomotives that could be used to pull passenger and freight trains. It was intended to be used where modern diesel railcars were too inflexible due to fluctuating passenger numbers or too weak due to the additional freight wagons that had to be carried. In order to reduce personnel costs, the more…
In order to determine the suitability of the different drives for heavy freight service, the German Deutsche Reichsbahn-Gesellschaft DRG included five-coupled tender locomotives with two and three cylinders in its standard locomotive program. In 1927, ten of each type were initially built. A further 35 of the 43 with two cylinders followed in 1928. In comparison, the two-cylinder locomotive proved to be equal to the three-cylinder locomotive known as the 44 series up to the medium power range more…
In 1943, the operational sites in the Wehrmacht-occupied areas in the east demanded more powerful steam locomotives for the supply freight trains. Borsig submitted the design of a (1’C)D h4 with an axle load of 20 t. Although the powerful locomotive was not released beyond the project stage, model railway manufacturers took the 53 in H0 and I gauge as a model. The sound comes from an original Mallet locomotive that is similar in terms of drive technology to BR 53.
Between 1929 and 1932, Krauss delivered 45 samples of the type 98.10 two-cylinder local railway locomotive to Deutsche Reichsbahn-Gesellschaft DRG on behalf of the Bavarian group administration. The locomotives, which largely corresponded technically to the 98.8 (GtL 4/4) delivered from 1923 onwards, were given a trailing axle to increase the top speed and improve the driving characteristics. With an output of 450 hp, the four-couplers were the most powerful Bavarian local railway machines. more…
As a replacement for the five-coupled prussian tender locomotives of the 94 series, the DB purchased a total of 37 examples of the 82 series from 1950. Compared to the Länderbahn locomotives, the locomotives had better cornering with their Beugniot levers. The locomotives had 1290 hp and reached a top speed of 70 km/h. The greater tractive power compared to the 30-year-old 94 was offset by a considerably higher coal consumption. The last two locomotives built were given a Riggenbach more…
The Prussian P8, built from 1906, was perhaps the best-known German steam locomotive series. Its designer Robert Garbe even wanted to see it used in express train service, but approval for 110 km/h failed due to its rough running at high speeds. The 1,180 hp two-cylinder locomotives reached 100 km/h and were considered undemanding and reliable pulling horses for passenger trains. They also proved their worth in front of light and fast freight trains. Of the 3,444 examples that were built for more…
In order to be able to pull express trains more quickly in the hill country, the Deutsche Reichsbahn-Gesellschaft DRG was already planning the 06, which was equipped with four coupling axles, parallel to the commissioning of the first 05. The 06, which was also designed with three cylinders, had an output of 2,800 hp and reached a top speed of 140 km/h. According to contemporary reports, the tractive power of both locomotives delivered in 1939 was impressive, but damage to the boiler frequently more…