BR 41 Öl 
H0
In the early 1950s German Deutsche Bundesbahn DB decided to replace worn out boilers of Class 41 steam locomotives with new ones. The 40 locos with oil firing developed 1975 HP and reached a maximum speed of 90 km/h. The 41s werde used for fast freight and heavy passenger service.
BR 44 Kohle H0
BR 44 had been the most successful steam loco for heavy freight trains at the Deutsche Reichsbahn-Gesellschaft (DRG). Between 1926 an end of WWII 1989 units of the 3 cylindred 2-10 had been built. They developed 1919 HP and reached a maximum speed of 80 km/h. In the 1950s Deutsche Bundesbahn (DB) and Deutsche Reichsbahn (DR) rebuilt 36 (DB) and 95 (DR) with oil firing equipment.
BR 44 Oel H0
BR 44 had been the most successful steam loco for heavy freight trains at the Deutsche Reichsbahn-Gesellschaft (DRG). Between 1926 an end of WWII 1989 units of the 3 cylindred 2-10 had been built. They developed 1919 HP and reached a maximum speed of 80 km/h. In the 1950s Deutsche Bundesbahn (DB) and Deutsche Reichsbahn (DR) rebuilt 36 (DB) and 95 (DR) with oil firing equipment.
BR 442 / Talent 2
In 2008 Talbot started delivery of electric regional railcar Talent 2 (numbered as BR 442). The manufacturer offers the railcars in different length up to a maximum tractive power of 4040 kW of a six-car unit. In any composite configuration each of the 325 railcars is able to reach a maximum speed of 160 km/h.
BR 45 H0
German Deutsche Reichsbahn-Gesellschaft DRG ordered 28 samples of steam locomotive BR 45 for heavy and fast freight duty. The 3-cylinder locos developed 2800 HP and reached a maximum speed of 90 km/h. After WW II seven locos were given to testing department BZA of Deutsche Bundesbahn to simulate heavy trains during approval runs of new locomotives.
BR 50 H0
In 1939 German Deutsche Reichsbahn-Gesellschaft DRG received 1st of more than 3100 samples of 2-10-0 two-cylinder steam loco BR 50. The loco developed 1625 HP and reached a maximum speed of 80 km/h. With its axle load of just 15,2 tons the locos were used even on branch lines with light weight rails. Locos of DB quitted service in 1977, the DR locos were used for ten more years.
BR 50.35 / BR 50.50
In 1959 German Deutsche Reichsbahn of GDR re-designed 1st of 208 samples of 2-10-0 two-cylinder steam loco BR 50. The Reko-50.35 loco developed 1760 HP and reached a maximum speed of 80 km/h. 50 samples were equipped with oil firing. With its axle load of just 15,4 tons the locos were used even on branch lines with light weight rails. In 1988 last remaining 50.35 went out of service.==> (oil burner instead coal shoveling sound selectable via CV48 = value 1) <==
BR 52 H0
In 1939 German Deutsche Reichsbahn-Gesellschaft DRG received 1st of more than 3100 samples of 2-10-0 two-cylinder steam loco BR 50. The loco developed 1625 HP and reached a maximum speed of 80 km/h. With its axle load of just 15,2 tons the locos were used even on branch lines with light weight rails. Locos of DB quitted service in 1977, the DR locos were used for ten more years.
BR 52 Kondenstender DRB H0
From 1942 the class 52 was derived from the light but powerful class 50 goods train tender locomotive developed from 1937 and mass-produced from 1939. Despite numerous simplifications, the war locomotive with 1640 hp had the same performance as the 50 and also reached 80 km/h when driving forwards. Initially, smoke deflectors were also dispensed with, but after a short time smaller Witte plates were retrofitted compared to the 50. So that the locomotives could withstand the winter in the more…
BR 52.80 DR H0
In the late 1950s German Deutsche Reichsbahn DR decided to modernize war-design freight locomotive BR 52. Around 200 samples received new boilers. The locos developed 1600 hp and reached a maximum speed of 80 km/h. With its axle load of only 16,3 tons the locos were used for freight and passenger trains even on branch lines.