")}("width","220px",["/lib/bootstrap-select/css/bootstrap-select.min.css"],"rel=\u0022stylesheet\u0022 ");
In 1977, based on the VT 627, the German Deutsche Bundesbahn DB ordered five test vehicles of the four-axle catenary inspection rail car 704. The four-axle vehicles, classed as BR 704, had a diesel-hydraulic power transmission. Propulsion was initially provided by two identical, independent drive systems with Deutz twelve-cylinder diesel engines, one of which was replaced by a more modern and lower-emission Deutz engine from 1986 onwards. The 140 km/h four-axle vehicles were intended to replace more…
In 1977, based on the VT 627, the German Deutsche Bundesbahn DB ordered five test vehicles of the four-axle catenary inspection rail car 704. The four-axle vehicles, classed as BR 704, had a diesel-hydraulic power transmission. Propulsion was initially provided by two identical, independent drive systems with Deutz twelve-cylinder diesel engines, one of which was replaced by a more modern and lower-emission Deutz engine from 1986 onwards. The 140 km/h four-axle vehicles were intended to replace more…
Instead of equipping electric locomotives with just a diesel power pack (last mile package), which enables them to be used independently of the driving current, for example on sidings, Stadler developed the EuroDual, which carries a full-fledged diesel engine. The EuroDual, run as the 159 series, runs purely electrically under the 15 kV-16 2/3 Hz system as well as in the AC and DC networks commonly used in France. Depending on the operating mode, traction power between 6150 kW and 7000 kW is more…
The Ivh of Badische Staatsbahn, later the 18³ series, was purchased from 1918 as an express steam locomotive primarily for the Rhine Valley Railway Basel - Mannheim. The manufacturer of all 20 machines was the renowned Munich locomotive factory J.A. Maffei. The IVh was designed as a 4-cylinder composite engine. The balanced drive made her a fast cross-country skier and the top speed could be increased from the original 110 km/h to 140 km/h. The use of the 18.3 on the famous Rheingold Express more…
Between 1915 and 1918, the Reichseisenbahnen Elsass-Lothringen (EL) procured a total of 27 examples of the 1140 hp Prussian tank locomotive T18. After the First World War, 26 of these were transferred to the now French successor railway Chemins de Fer d'Alsace et de Lorraine (A.L.) while retaining the original numbers. Only rarely did the reliable locomotives leave Alsatian territory. Like the German railways, the A.L. changed the brake system on their T18 and allowed the machines to run at 100 more…
Although the entire meter-gauge route network of the Rhaetian Railway RhB is electrified, the railway requires traction vehicles with a non-catenary power supply for construction site operations, for example. For such purposes, the RhB has been procuring a total of seven units of the bimodal Geaf 2/2 shunting locomotive since 2018. The lithium-ion battery has an output of 200 kW and is charged by a pantograph under the catenary and when braking through recuperation. An output of 500 kW is more…
To increase frequency on the meter-gauge main network, the Rhaetian Railway RhB ordered 56 units of the four-car ABe 4/16 multiple unit from Stadler. The four electric traction motors installed in one of the end cars produce a total of 1400 kW and accelerate the trains to a design speed of 120 km/h. Up to four units can be coupled in regular operation. The main routes are Davos – Filisur and Chur – Ilanz – Disentis, which are traveled at a maximum speed of 100 hm/h. At 163 km/h, a Capricorn more…
In the late 1930s the German DRG wanted to increase the weight of freight trains. Therefor six axle E94 had been developed. During WWII 146 samples were built. The six motor locos develop 3300 kW and reach a maximum speed of 90 km/h. After the war 44 locos were overtaken by Austrian Railway OEBB, another 23 were refitted by DR of German Democratic Republic of Germany. After building some new locos till 1956 the DB used 124 locos for heavy freight service. Sometimes the locos could be seen also more…
Only 15 examples of the Class 59 were built for various British freight companies. The construction logistics company Foster Yeoman took over one example in 1997 and had it converted for use in Germany. In 1999 HHPI took over the machine. Technically, the Class 59 with its 2500 kW EMD 16-cylinder 2-stroke diesel engine is a close relative of the US bestseller SD40-2. The maximum speed is 97 km/h, five locomotives are approved for 120 km/h. There is no train heating system on board.
Braking more…
Between 1976 and 1984, British Rail had 135 examples of the six-axle class 56 freight locomotive built. The final production of the first 30 of the series created according to BR plans was carried out with sub-assemblies in Romania at Electroputere. The following locomotives were assembled in England. The 16-cylinder Ruston-Paxman 16RK3CT diesel engine produced 2625 kW and generated the power for the six traction motors. In favor of reliability, the power was reduced to 2420 kW at 900 rpm. The more…