Showing items 1 - 10 of 19

18 323 N XL L M4

The Ivh of Badische Staatsbahn, later the 18³ series, was purchased from 1918 as an express steam locomotive primarily for the Rhine Valley Railway Basel - Mannheim. The manufacturer of all 20 machines was the renowned Munich locomotive factory J.A. Maffei. The IVh was designed as a 4-cylinder composite engine. The balanced drive made her a fast cross-country skier and the top speed could be increased from the original 110 km/h to 140 km/h. The use of the 18.3 on the famous Rheingold Express more…

BR 66 (DB) N XL L M4

The BR 66 had been a completely new design of Deutsche Bundesbahn in 1955. The two cylinder loco developed 1170 HP and reached a maximum speed of 100 km/h. It showed an excellent acceleration and tractive power but as DB switched motive power to diesel and electrics only two samples are built.

BR 75.1-3 / Badische VI b N XL L M4

German Badische Staatsbahn ordered 173 samples of 2-6-2 tank engine IV b for steep grades of Black Forrest lines. The two cylinder locos developed 540 HP and reached a maximum speed of 80 km/h.

BR 78 N XL L M4

In 1912 Prussian State Railway ordered the first of 462 samples of the 4-6-4 saddle tank loco T18. The two-cylinder loco developed 1140 HP and reached a maximum speed of 100 km/h. The locos were used for passenger trains on main and branch lines and stayed in service until 1974.

BR 78 / pr. T18 N XL L M4

In 1912 Prussian State Railway ordered the first of 462 samples of the 4-6-4 saddle tank loco T18. The two-cylinder loco developed 1140 HP and reached a maximum speed of 100 km/h. The locos were used for passenger trains on main and branch lines and stayed in service until 1974.

Sound project setup suitable for PIKO Locomotives from 2020. Function Mapping, Speed- and Motorsettings are adjusted. Please download to a LokSound 5 Decoder with PluX22 interface.

BR 83.10 N XL L M4


The new locomotive program of the Deutsche Reichsbahn DR after WW II contained a four-coupled tank locomotive with a drive wheel diameter of 1250 mm and a top speed of 60 km/h. The locomotive, which was designed for operation on branch lines, had an axle load of only 15 t. In accordance with their intended use, all locomotives had a bell next to the chimney. The last of the 27 units built from 1955 onwards was retired in 1974.
This project file is created for use in the PIKO H0-Model. For the more…

ELNA N XL L M4

To standardize steam locomotives, the Engere Locomotive Standards Committee (ELNA) was founded in 1917. In addition to the framework conditions for the Einheitslokomotiven of the Deutsche Reichsbahn-Gesellschaft DRG, the ELNA also laid down principles for steam locomotives of non-state-owned railways. Three types were developed, of which the 1’C and D versions were by far the most common. Many parts could be exchanged for one another. Since frames, water boxes and driver's cabs were not more…

RhB G 2/2 - G2/3 N XL L M4

In 1896 Swiss Rhaetian Railways RhB ordered two samples of Mallet type G2/2 + 2/3. The locos developed 510 HP and reached a maximum speed of 35 km/h. In 1926 RhB sold both locos to a Swiss power plant company.

SNCF 140 C N XL L M4

Between 1913 and 1917 the French state railway company ÉTAT purchased 340 copies of the 1’D 140 C steam locomotive. After the beginning of the First World War, production was outsourced to British manufacturers. A third series of 70 machines was ordered for the transport of French artillery trains and after the War sold in equal parts to the French Eastern Railway EST and the PLM. The locomotives intended for freight train service developed 1210 hp and achieved an impressive 70 km/h for a more…

T16.1 DB Ep-III N XL L M4

Prussian T16.1 had been one of the most important steam locomotives for short freight and heavy switching duty. The two cylinder loco delivered 1070 HP and reached a maximum speed of 60 km/h.