Showing items 101 - 110 of 138

BR03.10 DB Neubaukessel  LokSound 5 European Sound files N XL L M4

In the early days of the Deutsche Bundesbahn DB, the 03.10, which had been freed from the streamlining, were heavily used in express train service, which revealed the boiler's weaknesses. In order to remedy these deficiencies, the DB equipped a total of 25 units with new replacement boilers from 1957, which had proven themselves in the 41 series. With an output of 1870 hp and a top speed of 140 km/h, the locomotives from Hagen mainly pulled express trains. Since the locomotives were very more…

ET85 DR / BR485 DB  LokSound 5 European Sound files N XL L M4

Deutsche Reichsbahn-Gesellschaft DRG ordered 32 samples of electric railcar ET 85 in 1927. The four-axle units develop 500 kW and reach a maximum speed of 75 km/h (ET 85 05 and 09 enabled for 100 km/h).


Engineer/driver mode:

F4 / F5 - Pantograph up / down (only available in Engineer/driver mode). Engineer/driver mode switch on with CV170 = 1, Engineer/driver mode switch off with CV170 = 0)
The Engineer/driver mode serves as a prototypical control of the train. The realistic start up process more…

V162 / BR 217 DB  LokSound 5 European Sound files N XL L M4

Even during the series production of the V160, the German Federal Railroad DB was considering heating trains on non-electrified lines electrically instead of with steam, as was previously the case. In order not to have to divert power for the operation of the generator from the main diesel engine MTU MB 16 V 652 TB (1900 HP) taken over from the V160, it was decided to use the 12-cylinder engine MAN/MTU D 3650 HM 3 U with an output of 500 HP as a heating diesel engine, which had proven itself more…

BR65.10  LokSound 5 European Sound files N XL L M4

The new locomotive program of the Deutsche Reichsbahn DR after WW II contained a tank locomotive with a drive wheel diameter of 1,600 mm and a top speed of 90 km/h. The 88 1'D2 'tank locomotives designed for commuter train service had an axle load of 18 t. The well-dimensioned boiler and the carefully developed engine provided practical pulling power and good acceleration. Since the DR converted various branch lines to an axle load of 20 t, various 65.10 were equipped with a compressed air bell more…

BR 52.80 DR  LokSound 5 European Sound files N XL L M4

In the late 1950s German Deutsche Reichsbahn DR decided to modernize war-design freight locomotive BR 52. Around 200 samples received new boilers. The locos developed 1600 hp and reached a maximum speed of 80 km/h. With its axle load of only 16,3 tons the locos were used for freight and passenger trains even on branch lines.

BR 218 MTU-12V-956-TB11 blau  LokSound 5 European Sound files N XL L M4

After stricter exhaust gas values had been in effect since the early 1990s, it was clear that the 218 that were due for reengineering can no longer be equipped with the exhaust-optimized 12-cylinder diesel engine 12 V 956 TB11, as this no longer complied with the limit values. MTU therefore took the previous engine block from the TB11 and changed the electronics. The blue paintwork also makes the new motor look different from its gray predecessor. The soundscape of the two TB11 versions differs more…

BR 03 Reko DR  LokSound 5 European Sound files N XL L M4

Due to the lack of heavy express train steam locomotives of the 01 series, the 03, which was less suitable for these services, had to step in in the 1950s and 1960s. Since the locomotives were still quite new in the 1950s and in good general condition, the DR decided not to reconstruct them. However, after the very new boilers of the 22 decommissioned (reconstructed BR 39, ex. pr. P10) were available from 1969, 52 old building 03s were equipped with these Reko boilers. At this point, the DR's more…

DB BR185.2 Traxx F140 MS2  LokSound 5 European Sound files N XL L M4

Apart from the modified crash-optimized locomotive body, the second 185 generation can be distinguished from the first generation by a different noise development. The acoustically striking difference is mainly due to the modified AC converter system. The tripod bearing drive was also retained on the two-system locomotive internally designated as the F140 MS2. Under AC conditions, the four-axle vehicles deliver 5,600 kW and reach a top speed of 140 km/h. Under DC contact lines, the power is more…

BR Class 31  LokSound 5 European Sound files N XL L M4

After twenty pre-series locomotives of the six-axle Class 31 diesel locomotive, British Rail (BR) procured a further 243 units by 1962. The less reliable Mirrless diesel engine was replaced at an early stage by one from English Electric, which resulted in the 31/1 design, which was also equipped with an electropneumatic control system that had already proven its worth in other series. The 1100 kW diesel engine generates the energy for the four electric traction motors. The middle axles of the more…

BR Class 56  LokSound 5 European Sound files N XL L M4

Between 1976 and 1984, British Rail had 135 examples of the six-axle class 56 freight locomotive built. The final production of the first 30 of the series created according to BR plans was carried out with sub-assemblies in Romania at Electroputere. The following locomotives were assembled in England. The 16-cylinder Ruston-Paxman 16RK3CT diesel engine produced 2625 kW and generated the power for the six traction motors. In favor of reliability, the power was reduced to 2420 kW at 900 rpm. The more…