ScaleTrains.com SD40-2 Silenced Exhaust Version **MOTHERBOARD DIP SWITCHES MUST BE SET TO ON**
97456 LSV4.0 LokSound File. *Must use LSV4.0, File will not work with a LokSound Select*
97656 LPV4.0 Non Sound LokPilot File. *Must Use a LPV4.0, File with not work with a LP Standard*
Equipped with ESU "FULL THROTTLE" features!
MUST use LokProgrammer Version 4.5.3 or newer
Please note:
The Sound file contains a "Class Light" feature which allows for Cycling Aux2, Aux7, and Aux8 when using a 21MTC V4.0 decoder. If you wish to change the Mapping you must Assign the "Class Light" "Sound" to the function button of your choice and and be sure each Aux listed above is set to "Dimmable Headlight".
Please note the LPV4.0 does not have this class light feature. It is already set to allow the different color class lights to work on seperate functions.
File also contains a "low Idle" Mode on F4 when Standing Still.
Pressing F4 while not moving will lower the prime mover and lock the motor. F4 must be turned off to go to "regular idle" and begin moving.
Once moving, F4 becomes the Dynamic Brake.
There are up to 16 separate horns, 2 separate brake squeals and 2 bells included on this one sound profile! All changeable using CV48.
Prime Mover:
CV48=0 EMD 16cyl 645E3
Uses our INTERMEDIATE-HORNS-AND-BELLS template...
Horns:
CV48=0 Nathan K5LA
CV48=1 Nathan K3L
CV48=2 Nathan M5
CV48=3 Nathan P3
CV48=4 Nathan Old Cast P5
CV48=5 Nathan K3HA
CV48=6 Leslie RS3L
CV48=7 Leslie RS5T
CV48=8 Leslie A125
CV48=9 Nathan M3
CV48=10 Leslie RS3K
CV48=11 Nathan K5H
CV48=12 Leslie A-125
CV48=13 Nathan M3H
CV48=14 Leslie S3E
CV48=15 Leslie S5TRF
Bells:
CV48=0 EMD Steel Bell
CV48=64 EMD Bronze Bell
Add values from above for total CV48 value.
Default CV48 Value = 71
0 - EMD 16cyl 645E3
7 - Leslie RS5T
64 - EMD Bronze Bell
Total 0+7+64 = 71
Please Note:
File Contains a Modern E-Bell, and MILW E-Bell and a Gong Bell which can be selected in Function Mapping. Simply choose the appropriate Sound Slot for F1.
Sound Slot 4 is the default bell (changable with CV48)
Sound Slot 9 is the Modern E-Bell
Sound Slot 22 is the MILW E-Bell
Sound Slot 23 is the Gong Bell
New FULL THROTTLE features:
Drive Hold: Sound Slot 2 Mapped to F9
Independent Brake: Sound Slot 11 Mapped to F10
Run 8: Sound Slot 20 (not Mapped)
Coast: Sound Slot 21 (not Mapped)
For more info please see the "Full Throttle" Quick Start Guide in the ESU Instruction Manual Section of our Website.
http://www.esu.eu/en/downloads/instruction-manuals/digital-decoders/