Between 1967 and 1974, the French state railway SNCF purchased 92 copies of the six-axle CC 72000 for fast passenger traffic on non-electrified main lines. The 16-cylinder diesel engine AGO V16 ESHR from SACM has an output of 2650 kW at 1350 rpm and generates the energy for the two electric drive motors TAO 656 B1 in the bogies. The maximum speed is 160 km/h.
Different starting processes can be selected with F1: 1x press button = warm start / press button 2x = false start / press button 3x = cold start
F5 enables the heavy load mode: The diesel notch is always one up compared with normal operation. If you want to jump two notches, simply set CV 104 to 170 (instead of 150).
F27 turns on the manual ntoching. Once F28 is on, you can use F28 to notch up and F29 to notch down. F27, F28, and F29 must be turned off to return to normal mode. If F27 is off and you press F28, the prime mover will run to full speed.
F17 will bring the locomotive to full stop.
| Key | Functions | Sound slots | Volume CVs | Volume values |
|---|
| F0 | front light | | | |
| F1 | sound on/off | 1, 22 | 259, 427 | 128, 180 |
| F2 | air horn (high) | 3 | 275 | 255 |
| F3 | air horn (low) | 4 | 283 | 255 |
| F4 | radiator fan | 5 | 291 | 180 |
| F5 | heavy load | 32 | 507 | 200 |
| F6 | acceleration/brake time, shunting mode/shunting speed | | | |
| F7 | curve squeal | 15 | 371 | 255 |
| F8 | AUX#1 | | | |
| F9 | compressed air let off | 9 | 323 | 180 |
| F10 | conductor's signal | 10 | 331 | 120 |
| F11 | coupler clank | 8 | 315 | 180 |
| F12 | coasting | | | |
| F13 | apply locomotive brake/locomotive brake release (automaticly) | 13 | 355 | 110 |
| F14 | announcement #1 | 7 | 307 | 200 |
| F15 | esu smoke generator | | | |
| F16 | air horn station platform | 29 | 483 | 255 |
| F17 | brake function 1 | 25 | 451 | 140 |
| F18 | announcement #3 | 14 | 363 | 200 |
| F19 | apply/release hand brake | 21 | 419 | 90 |
| F20 | Radio communication #1 | 30 | 491 | 200 |
| F21 | switch flange | 18 | 395 | 255 |
| F22 | radio communication #2 (shunting distance) | 26 | 459 | 200 |
| F23 | HBA | 28 | 475 | 250 |
| F24 | compressor | 6 | 299 | 250 |
| F25 | sanding valve | 11 | 339 | 100 |
| F26 | sound fader | | | |
| F27 | manual notching logic on/off | 27 | 467 | 0 |
| F28 | manual notching up | | | |
| F29 | manual notching down | | | |
| F30 | disable brake squeal sound | | | |
| F31 | apply train brake/train brake release (automaticly) | 31 | 499 | 170 |
Make sure that index CV31 is set to 16 and index CV32 is set to 1 before changing a volume CV.