Manufacturer: ESU, Item number: S0737, Version: V5-R5
Southern Pacific 4449, also known as the Daylight, is the only surviving example of Southern Pacific Railroad's GS-4 class of steam locomotives and one of only two GS-class locomotives surviving, the other being GS-6 4460. The locomotive is a streamlined 4-8-4 "Northern"-type steam locomotive. GS is abbreviated from "Golden State", a nickname for California (where the locomotive was operated in regular service), or "General Service".
The locomotive was built by Lima Locomotive Works in Lima, Ohio, for SP in May 1941; it received the red-and-orange "Daylight" paint scheme for the passenger trains of the same name which it hauled for most of its service career. No. 4449 was retired from revenue service in 1956 and put into storage. In 1958, the SP donated the locomotive to the City of Portland, Oregon. The City then put the locomotive on static display in Oaks Amusement Park, where it remained until 1974.
The locomotive was then restored to operation for use in the American Freedom Train, which toured the 48 contiguous United States as part of the nation's 1976 Bicentennial celebration. The engine has operated in excursion service throughout that area since 1984.
The locomotive's operations are based at the Oregon Rail Heritage Center in Portland, Oregon, where it is maintained by a group of volunteers named the Friends of SP 4449. In 1983, a poll of Trains magazine readers selected 4449 as being the most popular locomotive in the nation.
This recording comes from SP 4449.
Whistles:
CV163=0 UP 844 "Steamboat"
CV163=1 SP&S 3 Chime
CV163=2 Steamboat 3 Chime
CV163=3 SP 4449 Daylight - Default
CV163=4 DRG&W 5 Chime
CV163=5 SOO Line 1003
CV163=6 DL&W 5 Chime
CV163=7 WM 6 Chime
Bells:
CV164=0 Pnuematic Bell 1
CV164=1 Pnuematic Bell 2
CV164=2 Pnuematic Bell 3
CV164=3 Steam Loco Rope Pull Bell
CV164=4 SOO Line 1003 Bell
CV164=5 UP 844 Air Ringer Bell
CV164=6 SP 4449 Bell - Default
CV164=7 DRG&W K27 Bell
Dynamos:
CV165=0 Soo Line 1003 Dynamo
CV165=1 K27 463 Dynamo
CV165=2 SPTriple Dynamo - Default
CV165=3 UP Dual Dynamo
CV165=4 Z27 Dynamo
CV165=5 T16.1 Dynamo
Air Pumps
CV166=0 Cross Compound #1 Soo Line 1003
CV166=1 Cross Compound #2 K27 463
CV166=2 Cross Compound #3 SP 4449 - Default
CV166=3 Cross Compound #4UP 844
CV166=4 Single Stage #1 Z27
CV166=5 Single Stage #2 T16.1
The ESU Full Throttle Steam files now include a few new logic features for added operational realism while still leaving you in control of HOW YOU wish to run your locomotive.
Heavy Load: F9 by default.
Similar to the “Drive Hold” button on the Full Throttle Diesel files “Heavy Load” allows you to adjust the “Steam Cut Off Valve” at any speed allowing for a fierce full chuff or drifting with snifters and rod clanks. Heavy load can also act as an offset allowing speed adjustments when engaged if desired.
Coast: F4 by default.
Opposite of “Heavy Load” Coast allows for a negative offset allow drifting sounds of Rods and snifter valves at any speed. You again have the option to hold the speed to adjust the speed with this offset active. Even allowing for an increase of speed with no chuffs as if drifting downhill.
Independent brake: F10 by default
Identical to the Full Throttle Diesel files. This allows for the locomotive to stop more quickly than its regular momentum would normally carry it. This one is pretty self-explanatory – just press the brake and come to a stop! For additional options there are 3 Braking rates that can be set up for user preference.
Articulation: Sound Slot 2
By adding Sound Slot 2 to the F8 Function Mapping and enabling the "Secondary Trigger" (CV250) you can add a second set of drivers making any ESU Steam File articulated.
Function Mappable Air Horn: F21 by default
Sound Slot 21.
Many Steam locomotives had a single chime airhorn equipped. Those modelling SP, MILW, and others can now have this feature and put it where they would like in the function mapping in addition to the whistle.
S0737 - Release Notes
===================================================
V-3 R-3:
===================================================
- updated independent brake
- updated boiler hiss
V-4 R-4:
===================================================
- updated steam chuff sound slot
V-5 R-5:
===================================================
- changed whistle sound slot 3 maximum sound slot speed to 128
Key | Functions | Sound slots | Volume CVs | Volume values |
---|---|---|---|---|
F0 | Directional Headlights | 16 | 379 | 7 |
F1 | Bell | 4 | 283 | 60 |
F2 | Whistle | 3 | 275 | 225 |
F3 | Coupler sounds | 8 | 315 | 50 |
F4 | Coast Mode | |||
F5 | (Aux3) Mars Light | 16 | 379 | 7 |
F6 | (Aux2) Cab Light | 16 | 379 | 7 |
F7 | Switching Mode | |||
F8 | Drive Sounds | 1, 2, 28, 32 | 259, 267, 475, 507 | 192, 192, 40, 4 |
F9 | Heavy Load Mode | |||
F10 | Independent Brake | 22 | 427 | 30 |
F11 | Coal Shoveling | 5 | 291 | 45 |
F12 | Dimmer | |||
F13 | (Aux4) Class Lights | 16 | 379 | 7 |
F14 | Air Pump Variable Speed | 6 | 299 | 40 |
F15 | Air Pump slow | 27 | 467 | 40 |
F16 | Injector | 20 | 411 | 30 |
F17 | Automatic Brake Set/Release Off | |||
F18 | Ash Dump | 14 | 363 | 35 |
F19 | Blowdown | 24 | 443 | 30 |
F20 | Safety Valve | 12 | 347 | 65 |
F21 | Air Horn | 21 | 419 | 225 |
F22 | Grade Crossing sequence | 23 | 435 | 225 |
F23 | Oil Headlight (no dynamo/generator) | |||
F24 | Stoker | 26 | 459 | 30 |
F25 | Oil Burner Blower | 7 | 307 | 40 |
F26 | Water Refil | 18 | 395 | 35 |
F27 | Dumping | 19 | 403 | 35 |
F28 | Sanding Valve | 11 | 339 | 25 |
F29 | Curve Squeal | 15 | 371 | 45 |
F30 | Disable Brake Squeal Sound | |||
F31 | Sound Fader |
Make sure that index CV31 is set to 16 and index CV32 is set to 1 before changing a volume CV.