Recorded from Boone & Scenic Valley Railway #8419 We would like to give a special thanks to the BSVY for their help in this project. To find out more about their operation or to book a ride please go to: https://bsvrr.com/wp/
The story of steam locomotive 8419 is as unique as the museum where it operates. In March of 1988, an article in National Geographic told about steam locomotives still being produced in China. A few months later, in May, two board members traveled to China to visit the factory and begin initial negations about purchasing a locomotive. When the locomotive rolled off of the line, the story is that the factory stopped production of steam locomotives, retooled, and began producing diesel electric locomotives. This makes 8419 the last commercially produced steam locomotive built in the world.
While built in China, this locomotive was purchased brand new and only used in the USA. It is very unique!
This Locomotive has a 2 Whistles and it's original Chinese Airhorn.
We have included multiple versions of each whistle in this file.
While recorded from a1988 Chinese JS 2-8-2 this file can be used for similar locomotives in many wheel arrangments.
Whistles:
CV163=0 BSVY #8419 CB&Q Crosby 3-Chime #1
CV163=1 UP #4014 Hancock 3-Chime
CV163=2 CB&Q 5-Chime Short Bell
CV163=3 BSVY #8419 CB&Q Crosby 3-Chime #2
CV163=4 MILW #261
CV163=5 Hancock Long Bell 3-Chime
CV163=6 BSVY #8419 Hancock Long Bell 3-Chime
Bells:
CV164=0 #8419 BSVY Bell
CV164=1 Pnuematic Bell 2
CV164=2 Rope Pull Bell
CV164=3 SOO Line 1003 Bell
CV164=4 DRG&W K27 Bell
Brake Squeal:
CV165=0 Brake Squeal #1 Long
CV165=1 Brake Squeal #1 Short
CV165=2 Brake Squeal #2 Long
CV165=3 Brake Squeal #2 Short
CV165=4 Brake Squeal #3 Long
CV165=5 Brake Squeal #4Short
Dynamos:
CV166=0 BSVY #8419 Dynamo
CV166=1 K27 463 Dynamo
CV166=2 T16.1 Dynamo
Air Pumps
CV167=0 Cross Compound #1 Soo Line 1003
CV167=1 Cross Compound #2 K27 463
CV167=2 Single Stage #1 Z27
CV167=3 Air Pump BSVY #8419
Reversers
CV168=0 Johnson Bar
CV168=1 Power Reverse
The ESU Full Throttle Steam files now include a few new logic features for added operational realism while still leaving you in control of HOW YOU wish to run your locomotive.
Heavy Load: F9 by default.
Similar to the “Drive Hold” button on the Full Throttle Diesel files “Heavy Load” allows you to adjust the “Steam Cut Off Valve” at any speed allowing for a fierce full chuff or drifting with snifters and rod clanks. Heavy load can also act as an offset allowing speed adjustments when engaged if desired.
Coast: F4 by default.
Opposite of “Heavy Load” Coast allows for a negative offset allow drifting sounds of Rods and snifter valves at any speed. You again have the option to hold the speed to adjust the speed with this offset active. Even allowing for an increase of speed with no chuffs as if drifting downhill.
Independent brake: F10 by default
Identical to the Full Throttle Diesel files. This allows for the locomotive to stop more quickly than its regular momentum would normally carry it. This one is pretty self-explanatory – just press the brake and come to a stop! For additional options there are 3 Braking rates that can be set up for user preference.
Articulation: Sound Slot 2
By adding Sound Slot 2 to the F8 Function Mapping and enabling the "Secondary Trigger" (CV250) you can add a second set of drivers making any ESU Steam File articulated.
Function Mappable Air Horn: F21 by default
Sound Slot 21.
Many Steam locomotives had a single chime airhorn equipped. Those modelling SP, MILW, and others can now have this feature and put it where they would like in the function mapping in addition to the whistle.
S0798 - Release Notes
===================================================
V-3 R-3:
===================================================
- updated independent brake
- updated boiler hiss
- updated steam chuff sound slot
V-4 R-4:
===================================================
- changed whistle sound slot 3 maximum sound slot speed to 128