Manufacturer: ESU, Item number: S0838, Version: V4-R4
Recorded from D&RGW #346
We would like to give a special thanks to the Colorado Railroad Museum for their help in this project. To find out more about their operation or to book a ride please go to: https://coloradorailroadmuseum.org/
The history of the Class 70/74/C-19 locomotives is confusing at best. All built as narrow gauge consolidations in 1881, some were converted to standard gauge at the end of that decade (1889). Eleven years later, in 1900, they were all switched back to narrow gauge and put back into the original 400-411 series of numbers, but were not given their original numbers back.
In early 1936, the D&RGW leased three C-19s - 343, 345, and 346 - to the C&S. C&S had wrecked engines 73 and 75 on Boreas Pass in Jan 1936, and due to weather conditions would be unable to retrieve them until spring. During their time on the C&S, all three received C&S Ridgway spark arrestors, and at least 346 had half flanges turned into its blind drivers to help with adhesion. 346 was wrecked a mile below Kenosha Pass on 25 Jul 1936, but was subsequently rebuilt by the C&S shops and continued in lease service right up until the end of the C&S narrow gauge in Apr 1937. At that point, all three were returned to the D&RGW.
#346 now lives at the Colorado Railroad Museum where is runs regularly.
While recorded from an early 2-8-0 this file can be used for smaller locomotives in many wheel arrangments.
Whistles:
CV163=0 DRGW #346
CV163=1 DRGW 5-Chime
CV163=2 SOO #1003
CV163=3 SP #4449
CV163=4 Hooter
CV163=5 CPR #2317
CV163=6 WM 6-Chime
CV163=7 CN 4 Chime
CV163=8 PRR Flat Top Single-Chime Banshee
CV163=9 DRGW #484
Bells:
CV164=0 #346 DRGW Bell 1
CV164=1 Pnuematic Bell 2
CV164=2 Rope Pull Bell
CV164=3 SOO Line 1003 Bell
CV164=4 DRG&W K27 Bell
Brake Squeal:
CV165=0 Brake Squeal #1 Long
CV165=1 Brake Squeal #1 Short
CV165=2 Brake Squeal #2 Long
CV165=3 Brake Squeal #2 Short
CV165=4 Brake Squeal #3 Long
CV165=5 Brake Squeal #4Short
Dynamos:
CV166=0 Soo Line 1003 Dynamo
CV166=1 K27 463 Dynamo
Air Pumps
CV167=0 Cross Compound #1 Soo Line 1003
CV167=1 Cross Compound #2 K27 463
CV167=2 Single Stage #1 Z27
CV167=3 Air Pump DRGW #346
Reversers
CV168=0 Johnson Bar
CV168=1 Power Reverse
The ESU Full Throttle Steam files now include a few new logic features for added operational realism while still leaving you in control of HOW YOU wish to run your locomotive.
Heavy Load: F9 by default.
Similar to the “Drive Hold” button on the Full Throttle Diesel files “Heavy Load” allows you to adjust the “Steam Cut Off Valve” at any speed allowing for a fierce full chuff or drifting with snifters and rod clanks. Heavy load can also act as an offset allowing speed adjustments when engaged if desired.
Coast: F4 by default.
Opposite of “Heavy Load” Coast allows for a negative offset allow drifting sounds of Rods and snifter valves at any speed. You again have the option to hold the speed to adjust the speed with this offset active. Even allowing for an increase of speed with no chuffs as if drifting downhill.
Independent brake: F10 by default
Identical to the Full Throttle Diesel files. This allows for the locomotive to stop more quickly than its regular momentum would normally carry it. This one is pretty self-explanatory – just press the brake and come to a stop! For additional options there are 3 Braking rates that can be set up for user preference.
Articulation: Sound Slot 2
By adding Sound Slot 2 to the F8 Function Mapping and enabling the "Secondary Trigger" (CV250) you can add a second set of drivers making any ESU Steam File articulated.
Function Mappable Air Horn: F21 by default
Sound Slot 21.
Many Steam locomotives had a single chime airhorn equipped. Those modelling SP, MILW, and others can now have this feature and put it where they would like in the function mapping in addition to the whistle.
S0838 - Release Notes
===================================================
V-3 R-3:
===================================================
- updated independent brake
- updated boiler hiss
- updated steam chuff sound slot
V-4 R-4:
===================================================
- changed whistle sound slot 3 maximum sound slot speed to 128
Key | Functions | Sound slots | Volume CVs | Volume values |
---|---|---|---|---|
F0 | Directional Headlights | 16 | 379 | 15 |
F1 | Bell | 4 | 283 | 45 |
F2 | Whistle | 3 | 275 | 255 |
F3 | Coupler sounds | 8 | 315 | 70 |
F4 | Coast Mode | 28 | 475 | 45 |
F5 | (Aux3) Mars Light | 16 | 379 | 15 |
F6 | (Aux2) Cab Light | 16 | 379 | 15 |
F7 | Switching Mode | |||
F8 | Drive Sounds | 1, 2, 32 | 259, 267, 507 | 255, 220, 8 |
F9 | Heavy Load Mode | |||
F10 | Independent Brake | 22 | 427 | 20 |
F11 | Coal Shoveling | 5 | 291 | 90 |
F12 | Dimmer | |||
F13 | (Aux4) Class Lights | 16 | 379 | 15 |
F14 | Air Pump Variable Speed | 6 | 299 | 60 |
F15 | Air Pump slow | 27 | 467 | 60 |
F16 | Injector | 20 | 411 | 20 |
F17 | Automatic Brake Set/Release Off | |||
F18 | Ash Dump | 14 | 363 | 64 |
F19 | Blowdown | 24 | 443 | 100 |
F20 | Safety Valve | 12 | 347 | 128 |
F21 | Air Horn | 23 | 435 | 124 |
F22 | Rods | |||
F23 | Oil Headlight (no dynamo/generator) | |||
F24 | Stoker | 26 | 459 | 40 |
F25 | Oil Burner Blower | 7 | 307 | 30 |
F26 | Water Refill | 18 | 395 | 70 |
F27 | Dumping | 19 | 403 | 70 |
F28 | Sanding Valve | 11 | 339 | 50 |
F29 | Curve Squeal | 15 | 371 | 55 |
F30 | Disable Brake Squeal Sound | |||
F31 | Sound Fader |
Make sure that index CV31 is set to 16 and index CV32 is set to 1 before changing a volume CV.