BR62 DRG/DB/DR 
H0
The class 62 express tank locomotive was part of the standard locomotive program of the German Reichsbahn-Gesellschaft (DRG). The 1,680 hp two-cylinder locomotive was designed for service on short main routes where the idea was to avoid turning the locomotives in the terminal stations in favor of short turnaround times. The drive wheel diameter of 1750 mm was a good compromise for good acceleration and a top speed of 100 km/h. During the DRG era, the 15 locomotives proved their worth, for more…
BR65.10 H0
The new locomotive program of the Deutsche Reichsbahn DR after WW II contained a tank locomotive with a drive wheel diameter of 1,600 mm and a top speed of 90 km/h. The 88 1'D2 'tank locomotives designed for commuter train service had an axle load of 18 t. The well-dimensioned boiler and the carefully developed engine provided practical pulling power and good acceleration. Since the DR converted various branch lines to an axle load of 20 t, various 65.10 were equipped with a compressed air bell more…
BR71 Einheitslok DRG DB H0
In the early 1930s, the Deutsche Reichsbahn-Gesellschaft DRG included a light 1’B1’ tender locomotive for branch lines in its standard locomotive program as a replacement for light regional railway tender locomotives that could be used to pull passenger and freight trains. It was intended to be used where modern diesel railcars were too inflexible due to fluctuating passenger numbers or too weak due to the additional freight wagons that had to be carried. In order to reduce personnel costs, the more…
BR76 pr. T10-KPEV-DRG H0
To speed up express trains on the relatively short 41 km route between Frankfurt and Wiesbaden, the Prussian state railway KPEV had a new, powerful tank locomotive developed. The engineer responsible, Robert Garbe, decided to marry the slightly shortened chassis of the P8 (later BR 38.10-40) with the boiler of the P6 (BR 37.0-1) and thus created the T10. The twelve samples of the 880 hp, 100 km/h two-cylinder locomotive proved to be up to the task and were in service with the KPEV and DRG for more…
BR82 Neubaulok DB H0
As a replacement for the five-coupled prussian tender locomotives of the 94 series, the DB purchased a total of 37 examples of the 82 series from 1950. Compared to the Länderbahn locomotives, the locomotives had better cornering with their Beugniot levers. The locomotives had 1290 hp and reached a top speed of 70 km/h. The greater tractive power compared to the 30-year-old 94 was offset by a considerably higher coal consumption. The last two locomotives built were given a Riggenbach more…
BR86 DRG/DB/DR H0
The DRG's standard locomotive program called for the Class 86 for mixed service on branch lines. With an output of 1030 hp and a top speed of 70 km/h with an axle load of only 15.6 t, the 86 replaced many series that dated back to the state railway era. From the factory, 86 293-296 and all other locomotives from locomotive number 86 336 onwards were equipped with Krauss-Helmholtz frames for the leading and trailing axles, which meant that the maximum speed could be increased to 80 km/h. By more…
BR89 /pr.T3 H0
Under the series designation T3, the Royal Prussian State Railroad KPEV combined a whole series of triple-coupled, slightly different freight locomotives. From 1882 about 1550 copies were made, some of which were also delivered to private railways that were later nationalized. The 290 PS strong and 40 km/h fast two-cylinder wet steam locomotives were popular due to their undemanding nature and managed the entire operation on many branch lines. After the maximum speed was no longer sufficient more…
BR93 pr. T14 H0
In 1914, the Prussian state railway KPEV ordered the first four-coupled T14 tank locomotive for heavy passenger and freight trains in local areas from Union in Königsberg. The 1000 hp four-coupler, equipped with a leading and trailing axle, was approved for 65 km/h. Although the locomotives suffered, for example, from the unequal load distribution on the drive axles, the railway company still purchased 547 units by 1918. More than 100 of these had to be handed over as reparations after the more…
BR94.5 pr.T16.1 H0
Prussian T16.1 had been one of the most important steam locomotives for short freight and heavy switching duty. The two cylinder loco delivered 1070 HP and reached a maximum speed of 60 km/h. SoundCV9 (CV163): train driver's dialogue (different languages selectable with value 0-4) SoundCV10 (CV164): rail joints (4x different selectable with value 0-3) SoundCV11 (CV165): airpumps (different selectable with value 0-1) SoundCV15 (CV169): steam brake / riggenbach back pressure brake (selectable more…
BR98.10 ex. GtL 4/5 DRG H0
Between 1929 and 1932, Krauss delivered 45 samples of the type 98.10 two-cylinder local railway locomotive to Deutsche Reichsbahn-Gesellschaft DRG on behalf of the Bavarian group administration. The locomotives, which largely corresponded technically to the 98.8 (GtL 4/4) delivered from 1923 onwards, were given a trailing axle to increase the top speed and improve the driving characteristics. With an output of 450 hp, the four-couplers were the most powerful Bavarian local railway machines. more…